Re: Trying to net install 2.99 - disk not being seen

It is an IDE drive too...

Scot P. Floess wrote:
> Sorry about that :(
>
> Its an Ultra 5, 400 Mhz with a 20 GB drive, 384 MB of RAM...
>
> In the past, if I used dhcp - it worked fine.  One thing I also noted, 
> if I try a static IP, eth0 is not recognized...  I had this problem 
> before with Corona and the response at that time was to use dhcp 
> (which is fine by me)...
>
> Anyway, this is more troubling in that my drive is not seen at all...
>
> Tom "spot" Callaway wrote:
>> On Tue, 2007-12-04 at 07:37 -0500, Scot P. Floess wrote:
>>   
>>> All:
>>>
>>> I am trying to do a net install for 2.99...  I chose dhcp (vs using a 
>>> static ip as I had some issue with that in the past), and when it gets 
>>> to the section to configure my drive...it shows now drives present.  The 
>>> drive is hda - and when I reboot (meaning cancel the install), the drive 
>>> is there and the machine boots...
>>>     
>>
>> What kind of hardware?
>>
>> ~spot
>>
>>
>>   
>
> -- 
> Scot P. Floess
> 27 Lake Royale
> Louisburg, NC  27549
>
> 252-478-8087 (Home)
> 919-754-4592 (Work)
>
> Chief Architect JPlate  http://sourceforge.net/projects/jplate
> Chief Architect JavaPIM http://sourceforge.net/projects/javapim
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Aurora-sparc-user mailing list
> [email protected]
> http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
> Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html

-- 
Scot P. Floess
27 Lake Royale
Louisburg, NC  27549

252-478-8087 (Home)
919-754-4592 (Work)

Chief Architect JPlate  http://sourceforge.net/projects/jplate
Chief Architect JavaPIM http://sourceforge.net/projects/javapim

_______________________________________________
Aurora-sparc-user mailing list
[email protected]
http://lists.auroralinux.org/mailman/listinfo/aurora-sparc-user
Aurora FAQ: http://www.ecs.soton.ac.uk/~mas01r/aurorafaq.html