Re: Debian installer

On 9/5/18 8:04 PM, Frank Scheiner wrote:
> Forgot one thing:
> 
> I had to blacklist the "radeon" module (with e.g. `modprobe.blacklist=radeon` in kernel command line) for all the above machines, otherwise the startup hangs
> after the "radeon" module was loaded.

Yes, same here on the HP BL-860 blades.

> I assume this is the same issue as on the rp34x0 systems (nearly identical to rx2620 hardware-wise IIC) although the VGA and additional serial port connectors
> aren't blocked physically on the rx2620. See [1] for details about the change for the rp3440.

Good point. We could try a similar patch on ia64.

Adrian