Diske ikke brugbare efter skift af styredisk

Kim Petersen <[email protected]>
Newsgroups gmane.linux.debian.user.danish
Organization Privat
Message-ID <[email protected]>
Hej. Jeg har et problem som jeg håber at i kan hjælpe mig med.
Jeg har en server, Debian GNU/Linux 3.1 som jeg kun har ssh-adgang til.
På den maskine har jeg 4 diske siddende på et promise kort.
Efter at maskinen har fået en ny styre disk, kan jeg ikke
længere få adgang til disse 4 diske, styredisken og et 5 drev er
der ingen problemer med at se.
---- uddrag af dmesg følger:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:04.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:pio
PDC20268: IDE controller at PCI slot 0000:00:0b.0
PCI: Found IRQ 10 for device 0000:00:0b.0
PDC20268: chipset revision 2
PDC20268: 100% native mode on irq 10
    ide2: BM-DMA at 0xa400-0xa407, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xa408-0xa40f, BIOS settings: hdg:pio, hdh:pio
PDC20262: IDE controller at PCI slot 0000:00:0d.0
PCI: Found IRQ 5 for device 0000:00:0d.0
PCI: Sharing IRQ 5 with 0000:00:04.2
PDC20262: chipset revision 1
PDC20262: 100% native mode on irq 5
PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide4: BM-DMA at 0x8800-0x8807, BIOS settings: hdi:DMA, hdj:pio
    ide5: BM-DMA at 0x8808-0x880f, BIOS settings: hdk:pio, hdl:pio
hda: IC35L180AVV207-1, ATA DISK drive
hdb: ASUS CD-S400/A, ATAPI CD/DVD-ROM drive
hdg: Maxtor 4G120J6, ATA DISK drive
hdi: probing with STATUS(0x50) instead of ALTSTATUS(0x00)
hdi: WDC WD1200JB-75CRA0, ATA DISK drive
hdj: probing with STATUS(0x50) instead of ALTSTATUS(0x00)
hdj: WDC WD1200JB-75CRA0, ATA DISK drive
hdk: WDC WD1200JB-75CRA0, ATA DISK drive
hdl: Maxtor 4G120J6, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide3 at 0xb000-0xb007,0xa802 on irq 10
ide4 at 0xa000-0xa007,0x9802 on irq 5
ide5 at 0x9400-0x9407,0x9002 on irq 5
hda: max request size: 1024KiB
hda: 361882080 sectors (185283 MB) w/7965KiB Cache, CHS=22526/255/63, 
UDMA(33)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
hdg: max request size: 1024KiB
hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=16383/255/63, 
UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: p1
hdi: max request size: 128KiB
hdi: Host Protected Area detected.
        current capacity is 234375000 sectors (120000 MB)
        native  capacity is 234441648 sectors (120034 MB)
hdi: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, 
UDMA(66)
 /dev/ide/host4/bus0/target0/lun0: p1 p2
hdj: max request size: 128KiB
hdj: Host Protected Area detected.
        current capacity is 234375000 sectors (120000 MB)
        native  capacity is 234441648 sectors (120034 MB)
hdj: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, 
UDMA(66)
 /dev/ide/host4/bus0/target1/lun0: p1 p2
hdk: max request size: 128KiB
hdk: Host Protected Area detected.
        current capacity is 234375000 sectors (120000 MB)
        native  capacity is 234441648 sectors (120034 MB)
hdk: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63, 
UDMA(66)
 /dev/ide/host4/bus1/target0/lun0: p1
hdl: max request size: 1024KiB
hdl: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=16383/255/63, 
UDMA(66)
 /dev/ide/host4/bus1/target1/lun0: p1
----- uddrag slut:
Diskene det drejer sig om er i,j,k og l
fdisk kan heller ikke åbne dem.
Hvad gør jeg, for at få fat i dem igen ? Helst uden data-tab.
-- 
Venlig hilsen Kim Petersen


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.361 / Virus Database: 267.12.4/146 - Release Date: 21-10-2005


-- 
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.