Re: Booting Stuck at Starting ACPI Daemon
"A. Zainal Abidin" <[email protected]>
| Newsgroups | gmane.linux.distributions.gobo.general |
|---|---|
| Message-ID | <CAEjQrh=01XVNJuGTUtx=sZ_zJqQ0QzWq0ZQKG_NH5YRdYFw77w@mail.gmail.com> |
Hello :) thanks for your help before :) i already changethe content of ~/.xinitrcand the result still the same. freeze, i dont know it just X error or the machine death cos, i only use 1 machine. with this email, i attach Xorg.0.log from /Data/Variable/log/ thanks for your help :) best regards On Mon, May 26, 2014 at 12:04 PM, Lucas C. Villa Real <[email protected]> wrote: > On Mon, May 26, 2014 at 4:51 AM, A. Zainal Abidin <[email protected]> > wrote: >> >> Wow >> >> Its works like a charm :) > > > Good to know! > >> >> okey, now my GoBo Linux can boot to CLI :) >> after login, i type : startx >> and my linux was freeze (cannot do anything,need to hold power button >> to turn it off) >> >> how to enter GUI mode or make default startup to GUI mode > > > startx was supposed to do the job for you. There is clearly something wrong > with the detection of some hardware component of your machine. > > By default, 'startx' will read the contents of ~/.xinitrc and launch the > window manager of choice listed there. If you edit that file, you will > notice a line which invokes 'enlightenment_start'. Try to comment that line > out. That will cause twm to be executed by 'startx' instead of the default > desktop environment. > > If that doesn't work, then please send me the contents of > /Data/Variable/log/Xorg.0.log. That file should contain the actual error > message. > > Another thing that comes to mind is: if you have more than one machine > around, try to SSH to GoboLinux and to launch 'startx' from the remote > machine. Then you should be able to tell if the machine is really dead or if > that's just the video driver which crashed. Alternatively, you may try to > ping the GoboLinux machine as you invoke startx. That should also tell you > if the machine is still responding or not. > > Lucas -- ---------- A. Zainal Abidin [ zhain ] Y!id : zhainhart eMail : [email protected] --------- _______________________________________________ gobolinux-users mailing list [email protected] http://lists.gobolinux.org/mailman/listinfo/gobolinux-users
Xorg.0.log
(application/octet-stream, 19.4 KB)
[ 201.743] X.Org X Server 1.15.0 Release Date: 2013-12-27 [ 201.746] X Protocol Version 11, Revision 0 [ 201.746] Build Operating System: Linux 3.12.2-Gobo i686 GoboLinux [ 201.747] Current Operating System: Linux Juno 3.14.2-Gobo #1 SMP PREEMPT Sat May 3 22:59:40 GMT 2014 i686 [ 201.747] Kernel command line: BOOT_IMAGE=/System/Kernel/Boot/kernel-3.14.2-Gobo root=/dev/sda3 ro vt.default_utf8=1 console=/dev/null video=LVDS-1:e video=HDMI-1:e video=VGA=1:e [ 201.750] Build Date: 04 January 2014 04:58:17AM [ 201.751] [ 201.752] Current version of pixman: 0.32.4 [ 201.754] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 201.754] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 201.758] (==) Log file: "/Data/Variable/log/Xorg.0.log", Time: Mon May 26 12:09:44 2014 [ 201.797] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 201.811] (==) No Layout section. Using the first Screen section. [ 201.811] (==) No screen section available. Using defaults. [ 201.811] (**) |-->Screen "Default Screen Section" (0) [ 201.811] (**) | |-->Monitor "<default monitor>" [ 201.827] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 201.827] (==) Automatically adding devices [ 201.827] (==) Automatically enabling devices [ 201.827] (==) Automatically adding GPU devices [ 201.926] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/, /usr/share/fonts/100dpi/, /usr/share/fonts/75dpi/ [ 201.926] (==) ModulePath set to "/usr/lib/xorg/modules" [ 201.926] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 201.934] (II) Loader magic: 0x825d540 [ 201.934] (II) Module ABI versions: [ 201.934] X.Org ANSI C Emulation: 0.4 [ 201.934] X.Org Video Driver: 15.0 [ 201.934] X.Org XInput driver : 20.0 [ 201.934] X.Org Server Extension : 8.0 [ 201.934] (II) xfree86: Adding drm device (/dev/dri/card0) [ 201.936] (--) PCI:*(0:0:2:0) 8086:2a02:1558:0122 rev 3, Mem @ 0xf8000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8 [ 201.936] (--) PCI: (0:0:2:1) 8086:2a03:1558:0122 rev 3, Mem @ 0xf8100000/1048576 [ 201.936] (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused) [ 201.938] Initializing built-in extension Generic Event Extension [ 201.939] Initializing built-in extension SHAPE [ 201.940] Initializing built-in extension MIT-SHM [ 201.942] Initializing built-in extension XInputExtension [ 201.943] Initializing built-in extension XTEST [ 201.944] Initializing built-in extension BIG-REQUESTS [ 201.945] Initializing built-in extension SYNC [ 201.947] Initializing built-in extension XKEYBOARD [ 201.948] Initializing built-in extension XC-MISC [ 201.949] Initializing built-in extension XINERAMA [ 201.950] Initializing built-in extension XFIXES [ 201.952] Initializing built-in extension RENDER [ 201.953] Initializing built-in extension RANDR [ 201.955] Initializing built-in extension COMPOSITE [ 201.956] Initializing built-in extension DAMAGE [ 201.957] Initializing built-in extension MIT-SCREEN-SAVER [ 201.959] Initializing built-in extension DOUBLE-BUFFER [ 201.960] Initializing built-in extension RECORD [ 201.961] Initializing built-in extension DPMS [ 201.963] Initializing built-in extension Present [ 201.964] Initializing built-in extension X-Resource [ 201.965] Initializing built-in extension XVideo [ 201.967] Initializing built-in extension XVideo-MotionCompensation [ 201.968] Initializing built-in extension XFree86-VidModeExtension [ 201.969] Initializing built-in extension XFree86-DGA [ 201.971] Initializing built-in extension XFree86-DRI [ 201.972] Initializing built-in extension DRI2 [ 201.972] (II) LoadModule: "glx" [ 201.997] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 202.050] (II) Module glx: vendor="X.Org Foundation" [ 202.050] compiled for 1.15.0, module version = 1.0.0 [ 202.050] ABI class: X.Org Server Extension, version 8.0 [ 202.050] (==) AIGLX enabled [ 202.051] Loading extension GLX [ 202.051] (==) Matched intel as autoconfigured driver 0 [ 202.051] (==) Matched intel as autoconfigured driver 1 [ 202.051] (==) Matched modesetting as autoconfigured driver 2 [ 202.051] (==) Matched fbdev as autoconfigured driver 3 [ 202.051] (==) Matched vesa as autoconfigured driver 4 [ 202.051] (==) Assigned the driver to the xf86ConfigLayout [ 202.051] (II) LoadModule: "intel" [ 202.061] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 202.121] (II) Module intel: vendor="X.Org Foundation" [ 202.121] compiled for 1.15.0, module version = 2.99.907 [ 202.121] Module class: X.Org Video Driver [ 202.121] ABI class: X.Org Video Driver, version 15.0 [ 202.121] (II) LoadModule: "modesetting" [ 202.121] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 202.129] (II) Module modesetting: vendor="X.Org Foundation" [ 202.129] compiled for 1.15.0, module version = 0.8.1 [ 202.129] Module class: X.Org Video Driver [ 202.129] ABI class: X.Org Video Driver, version 15.0 [ 202.129] (II) LoadModule: "fbdev" [ 202.130] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 202.139] (II) Module fbdev: vendor="X.Org Foundation" [ 202.139] compiled for 1.15.0, module version = 0.4.4 [ 202.139] Module class: X.Org Video Driver [ 202.139] ABI class: X.Org Video Driver, version 15.0 [ 202.139] (II) LoadModule: "vesa" [ 202.139] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 202.144] (II) Module vesa: vendor="X.Org Foundation" [ 202.144] compiled for 1.15.0, module version = 2.3.3 [ 202.144] Module class: X.Org Video Driver [ 202.144] ABI class: X.Org Video Driver, version 15.0 [ 202.144] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 202.146] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000 [ 202.146] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100 [ 202.146] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200 [ 202.146] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 202.146] (II) FBDEV: driver for framebuffer: fbdev [ 202.146] (II) VESA: driver for VESA chipsets: vesa [ 202.146] (--) using VT number 7 [ 202.153] (WW) Falling back to old probe method for modesetting [ 202.153] (WW) Falling back to old probe method for fbdev [ 202.153] (II) Loading sub module "fbdevhw" [ 202.153] (II) LoadModule: "fbdevhw" [ 202.153] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 202.162] (II) Module fbdevhw: vendor="X.Org Foundation" [ 202.162] compiled for 1.15.0, module version = 0.0.2 [ 202.162] ABI class: X.Org Video Driver, version 15.0 [ 202.162] (WW) Falling back to old probe method for vesa [ 202.180] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM [ 202.180] (--) intel(0): CPU: x86, sse2, sse3, ssse3 [ 202.180] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 202.180] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 202.180] (==) intel(0): RGB weight 888 [ 202.180] (==) intel(0): Default visual is TrueColor [ 202.180] (**) intel(0): Framebuffer tiled [ 202.180] (**) intel(0): Pixmaps tiled [ 202.180] (**) intel(0): "Tear free" disabled [ 202.180] (**) intel(0): Forcing per-crtc-pixmaps? no [ 202.180] (II) intel(0): Output LVDS1 has no monitor section [ 202.180] (--) intel(0): found backlight control interface acpi_video0 (type 'firmware') [ 202.180] (II) intel(0): Output VGA1 has no monitor section [ 202.180] (II) intel(0): Output VIRTUAL1 has no monitor section [ 202.180] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 0 [ 202.180] (==) intel(0): DPI set to (96, 96) [ 202.180] (II) Loading sub module "dri2" [ 202.180] (II) LoadModule: "dri2" [ 202.180] (II) Module "dri2" already built-in [ 202.180] (II) UnloadModule: "modesetting" [ 202.180] (II) Unloading modesetting [ 202.181] (II) UnloadModule: "fbdev" [ 202.181] (II) Unloading fbdev [ 202.181] (II) UnloadSubModule: "fbdevhw" [ 202.181] (II) Unloading fbdevhw [ 202.181] (II) UnloadModule: "vesa" [ 202.181] (II) Unloading vesa [ 202.181] (==) Depth 24 pixmap format is 32 bpp [ 202.211] (II) intel(0): SNA initialized with Broadwater (gen4) backend [ 202.211] (==) intel(0): Backing store enabled [ 202.211] (==) intel(0): Silken mouse enabled [ 202.211] (II) intel(0): HW Cursor enabled [ 202.211] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 202.212] (==) intel(0): DPMS enabled [ 202.212] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 202.212] (II) intel(0): [DRI2] Setup complete [ 202.212] (II) intel(0): [DRI2] DRI driver: i965 [ 202.212] (II) intel(0): direct rendering: DRI2 Enabled [ 202.212] (==) intel(0): hotplug detection: "enabled" [ 202.212] (--) RandR disabled [ 202.367] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 202.367] (II) AIGLX: enabled GLX_ARB_create_context [ 202.367] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 202.367] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile [ 202.367] (II) AIGLX: enabled GLX_INTEL_swap_event [ 202.367] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 202.367] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 202.367] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 202.367] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 202.367] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 202.367] (II) AIGLX: Loaded and initialized i965 [ 202.367] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 202.372] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 202.383] (II) intel(0): Setting screen physical size to 338 x 211 [ 202.820] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 202.820] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 202.820] (II) LoadModule: "evdev" [ 202.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 202.884] (II) Module evdev: vendor="X.Org Foundation" [ 202.884] compiled for 1.15.0, module version = 2.8.2 [ 202.884] Module class: X.Org XInput Driver [ 202.884] ABI class: X.Org XInput driver, version 20.0 [ 202.884] (II) Using input driver 'evdev' for 'Power Button' [ 202.884] (**) Power Button: always reports core events [ 202.884] (**) evdev: Power Button: Device: "/dev/input/event4" [ 202.884] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 202.884] (--) evdev: Power Button: Found keys [ 202.884] (II) evdev: Power Button: Configuring as keyboard [ 202.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4" [ 202.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 202.884] (**) Option "xkb_rules" "evdev" [ 202.884] (**) Option "xkb_model" "pc104" [ 202.884] (**) Option "xkb_layout" "us" [ 202.918] (II) config/udev: Adding input device Video Bus (/dev/input/event10) [ 202.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 202.918] (II) Using input driver 'evdev' for 'Video Bus' [ 202.918] (**) Video Bus: always reports core events [ 202.918] (**) evdev: Video Bus: Device: "/dev/input/event10" [ 202.918] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 202.918] (--) evdev: Video Bus: Found keys [ 202.918] (II) evdev: Video Bus: Configuring as keyboard [ 202.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input17/event10" [ 202.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 202.918] (**) Option "xkb_rules" "evdev" [ 202.918] (**) Option "xkb_model" "pc104" [ 202.918] (**) Option "xkb_layout" "us" [ 202.919] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 202.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 202.919] (II) Using input driver 'evdev' for 'Power Button' [ 202.919] (**) Power Button: always reports core events [ 202.919] (**) evdev: Power Button: Device: "/dev/input/event1" [ 202.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 202.919] (--) evdev: Power Button: Found keys [ 202.919] (II) evdev: Power Button: Configuring as keyboard [ 202.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event1" [ 202.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 202.919] (**) Option "xkb_rules" "evdev" [ 202.919] (**) Option "xkb_model" "pc104" [ 202.919] (**) Option "xkb_layout" "us" [ 202.919] (II) config/udev: Adding input device Lid Switch (/dev/input/event3) [ 202.919] (II) No input driver specified, ignoring this device. [ 202.919] (II) This device may have been added with another device file. [ 202.920] (II) config/udev: Adding input device Sleep Button (/dev/input/event2) [ 202.920] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 202.920] (II) Using input driver 'evdev' for 'Sleep Button' [ 202.920] (**) Sleep Button: always reports core events [ 202.920] (**) evdev: Sleep Button: Device: "/dev/input/event2" [ 202.920] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 202.920] (--) evdev: Sleep Button: Found keys [ 202.920] (II) evdev: Sleep Button: Configuring as keyboard [ 202.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6/event2" [ 202.920] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 202.920] (**) Option "xkb_rules" "evdev" [ 202.920] (**) Option "xkb_model" "pc104" [ 202.920] (**) Option "xkb_layout" "us" [ 202.920] (II) config/udev: Adding drm device (/dev/dri/card0) [ 202.921] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) [ 202.921] (II) No input driver specified, ignoring this device. [ 202.921] (II) This device may have been added with another device file. [ 202.921] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7) [ 202.921] (II) No input driver specified, ignoring this device. [ 202.921] (II) This device may have been added with another device file. [ 202.921] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event6) [ 202.921] (II) No input driver specified, ignoring this device. [ 202.921] (II) This device may have been added with another device file. [ 202.922] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12) [ 202.922] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall" [ 202.922] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 202.922] (**) Logitech USB Receiver: always reports core events [ 202.922] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event12" [ 202.984] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 202.984] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons [ 202.984] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 202.984] (--) evdev: Logitech USB Receiver: Found relative axes [ 202.984] (--) evdev: Logitech USB Receiver: Found x and y relative axes [ 202.984] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 202.984] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 202.984] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 202.984] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 202.984] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/0003:046D:C52F.0001/input/input19/event12" [ 202.984] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10) [ 202.984] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 202.984] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 202.984] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 202.984] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 202.984] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 202.985] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse2) [ 202.985] (II) No input driver specified, ignoring this device. [ 202.985] (II) This device may have been added with another device file. [ 202.986] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13) [ 202.986] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall" [ 202.986] (II) Using input driver 'evdev' for 'Logitech USB Receiver' [ 202.986] (**) Logitech USB Receiver: always reports core events [ 202.986] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13" [ 202.986] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f [ 202.986] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons [ 202.986] (--) evdev: Logitech USB Receiver: Found scroll wheel(s) [ 202.986] (--) evdev: Logitech USB Receiver: Found relative axes [ 202.986] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist. [ 202.986] (--) evdev: Logitech USB Receiver: Found absolute axes [ 202.986] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist. [ 202.986] (--) evdev: Logitech USB Receiver: Found keys [ 202.986] (II) evdev: Logitech USB Receiver: Configuring as mouse [ 202.986] (II) evdev: Logitech USB Receiver: Configuring as keyboard [ 202.986] (II) evdev: Logitech USB Receiver: Adding scrollwheel support [ 202.986] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5 [ 202.986] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 202.986] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.1/0003:046D:C52F.0002/input/input20/event13" [ 202.986] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11) [ 202.987] (**) Option "xkb_rules" "evdev" [ 202.987] (**) Option "xkb_model" "pc104" [ 202.987] (**) Option "xkb_layout" "us" [ 202.987] (II) evdev: Logitech USB Receiver: initialized for relative axes. [ 202.987] (WW) evdev: Logitech USB Receiver: ignoring absolute axes. [ 202.987] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1 [ 202.987] (**) Logitech USB Receiver: (accel) acceleration profile 0 [ 202.988] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 202.988] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 202.988] (II) config/udev: Adding input device ET&T Technology TC4UM (/dev/input/event11) [ 202.989] (**) ET&T Technology TC4UM: Applying InputClass "evdev touchscreen catchall" [ 202.989] (II) Using input driver 'evdev' for 'ET&T Technology TC4UM' [ 202.989] (**) ET&T Technology TC4UM: always reports core events [ 202.989] (**) evdev: ET&T Technology TC4UM: Device: "/dev/input/event11"