RE: aacraid Errors on PE 2450

> Feb  4 07:20:20 chinook kernel: aacraid:ID(0:00:0); Error Event
[command:0x28]
> Feb  4 07:20:20 chinook kernel: aacraid:ID(0:00:0); Unit Attention
[k:0x6,c:0x29,q:0x2]
> Feb  4 07:20:20 chinook kernel: aacraid:ID(0:00:0); Power On, Reset, or
Bus Device Reset

It looks like physical disk 0 is going bad, or possibly the enclosure slot.
Use afacli's "disk show smart" function
(http://docs.us.dell.com/docs/storage/57kgr/cli/en/diskcomm.htm#30488) and
"diagnostic show history"
(http://docs.us.dell.com/docs/storage/57kgr/cli/en/diagcomm.htm#28109)
commands to determine if this is the case.  If you can determine that the
disk is going bad, yes, it should be replaced.  Dell Tech Support can assist
with that, ordering replacements, etc.

Thanks,
Matt

--
Matt Domsch
Sr. Software Engineer, Lead Engineer, Architect
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com

_______________________________________________
Linux-aacraid-devel mailing list
[email protected]
http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/