Re: SCSI problems with a 2650

Andy De Petter <[email protected]> Fri, 25 Jul 2003 16:09:49 +0200
Newsgroups gmane.linux.hardware.dell.poweredge,gmane.linux.drivers.aacraid.devel
Message-ID <[email protected]>
I'ld like to add this:

I have the problem only on 2650 running dual 2.0Ghz Xeon, and not on 
2650 running dual 2.4Ghz Xeon, while I have exactly the same Linux 
flavor, with exactly the same drivers.

-Andy

Vincent Blondel wrote:
> Stuart,
> 
> The real problem, I think , is not exactly and only
> with Dell 2650 servers because I don't have one.
> 
> For remind my config is the following :
> 
> - motherboard TYAN s2468GN
> - 2 x 512 PC2100/ddr226 Kingston memory module
> - 2 x AMD Athlon MP 1800+
> - Controller raid scsi ADAPTEC 5400s
> - 4 x Hard Drive Cheetah 15k.3 18.4gb U320 Scsi-80
> 3.6ms 15k Rpm 3.5lp ( RAID-5 )
> - DVD ide PIONEER
> 
> so I would correct what you say with this :
> 
> 1.  This is a common problem being experienced by
>     a lot of users running Linux, and 
> SMP (Intel/AMD) machines with a RAID SCSI Controller (
> with chipset equivalent to this one on Adaptec 5400s -
> so module aacraid )
> 2.  No one knows what the cause is ...
> 3.  No one has any idea how to solve it either.
>     ( This is not exactly true. ) I received an answer
> from alan saying this : 
> 
> "As far as I can tell everyone in adaptec who knew
> anything about this hardware and Linux was
> 'downsized'"
> 
> So our problem could well be resolved if Adaptec
> suports correctly their products. I found this
> behaviour very dramatic for a so well known company
> with so expensive and high level products.
> 
> So as I said it in this list, I will try this weekend
> ( if I have time , not guaranteed !!! ) to install
> FreeBSD and to analyze how this OS behaves with my
> machine.  I know well this is not a linux solution but
> if it really not work with it, what can we do ???
> 
> Furthermore, I searched a general e-mail for Adaptec
> company to ask their opinion about this mail but I
> didn't find one.
> 
> So, maybe one day Adaptec will really supports linux
> ...
> let's talk about this ...
> vincent.
> 
> --- Russell Stuart <[email protected]> wrote:
> 
>>On Tue, 2003-07-22 at 16:21, Russell Stuart wrote:
>>
>>>This is a long post because it represents 6 months
>>
>>worth of effort in
>>
>>>trying to solve the problem myself.  I have now
>>
>>decided its a hardware
>>
>>>problem.  What I am after is confirmation, or
>>
>>failing that suggestions
>>
>>>on what to do next.  Preferably this should come
>>
>>from someone with
>>
>>>"@dell.com" or "@redhat.com" in their email
>>
>>address for reasons that
>>
>>>will be obvious later.
>>
>>Well, that was met with deathly silence - from dell
>>and redhat anyway. 
>>Given what Vincent said, I take it the situation is:
>>
>>  1.  This is a common problem being experienced by
>>a lot of 2650
>>      users running Linux, and
>>
>>  2.  No one knows what the cause is, ergo
>>
>>  3.  No one has any idea how to solve it either.
>>
>>Is that an accurate summary?
>>
>>_______________________________________________
>>Linux-aacraid-devel mailing list
>>[email protected]
>>
> 
> http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
> 
>>Please read the FAQ at http://lists.us.dell.com/faq
>>or search the list archives at
> 
> http://lists.us.dell.com/htdig/
> 
> 
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> http://sitebuilder.yahoo.com

-- 
Andy De Petter - Expert  IT Analyst - [email protected]
Belgacom ANS/EIS/ISA - Carlistraat  2 - 1140 Brussels (Belgium)
Head office: Koning Albert II Laan 27 - 1030 Brussels (Belgium)
Tel +32 (0)2 7061170  -  Fax +32 (0)2 7061150  -  ICQ  #1548957

*** DISCLAIMER ***
This e-mail and any attachments thereto may contain information, which
is confidential and/or protected by intellectual property rights and
are intended for the sole use of the recipient(s) named above. Any use
of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any
form) by persons other than the designated recipient(s) is prohibited.
If you have received this e-mail in error, please notify the sender
either by telephone or by e-mail and delete the material from any
computer. Thank you for your cooperation.

_______________________________________________
Linux-PowerEdge mailing list
[email protected]
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/