Afacli conatiner list output in linux
Becky Poon <poonbecky-/[email protected]>
| Newsgroups | gmane.linux.drivers.aacraid.devel |
|---|---|
| Message-ID | <[email protected]> |
Can someone shed me some light on this?
The 'container list' command show the output below.
What is the meaning of the "linux_root" in the output?
We got serveral servers ( all 2650 ) with exactly
the same config in raid but have different value on
this field in the 'container list' output. Some show
"linux_root", some show "0" , some show "1" while some
does not have this field at all. Pls advise.
THanks,
Becky
AFA0> container list
Executing: container list
Num Total Oth Chunk Scsi
Partition
Label Type Size Ctr Size Usage B:ID:L
Offset:Size
----- ------ ------ --- ------ ------- ------
-------------
0 Mirror 16.9GB Open 0:00:0
64.0KB:16.9GB
/dev/sda linux_root 0:01:0
64.0KB:16.9GB
AFA0>
AFA0> controller details
Executing: controller details
Controller Information
----------------------
Remote Computer: .
Device Name: AFA0
Controller Type: PERC 3/Di
Access Mode: READ-WRITE
Controller Serial Number: Last Six Digits = 9838D3
Number of Buses: 2
Devices per Bus: 15
Controller CPU: i960 R series
Controller CPU Speed: 100 Mhz
Controller Memory: 128 Mbytes
Battery State: Ok
Component Revisions
-------------------
CLI: 3.0-0 (Build #4880)
API: 3.0-0 (Build #4880)
Miniport Driver: 3.0-0 (Build #20773)
Controller Software: 2.7-1 (Build #3170)
Controller BIOS: 2.7-1 (Build #3170)
Controller Firmware: (Build #3170)
_______________________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com.hk address at http://mail.english.yahoo.com.hk
_______________________________________________
Linux-aacraid-devel mailing list
[email protected]
http://lists.us.dell.com/mailman/listinfo/linux-aacraid-devel
Please read the FAQ at http://lists.us.dell.com/faq or search the list archives at http://lists.us.dell.com/htdig/