ZTE and kernel 2.6

Hi,

 I just installed the driver on my Laptop with FC2 (2.6.8-1.521) I get
the following errors in my log and the device doesn't work. The unit
is a ZTE W200C USB adapter (I used to have it working with FC1 kernel
2.4). The USB driver is ohci_hcd.

Oct 29 12:56:53 jdoe kernel: ohci_hcd 0000:00:02.0: wakeup
Oct 29 12:56:54 jdoe kernel: usb 1-2: new full speed USB device using address 3
Oct 29 12:56:55 jdoe kernel: /usr/src/redhat/BUILD/at76c503a/usbdfu.c:
USB Device Firmware Upgrade (DFU) handler v0.12beta11 loading
Oct 29 12:56:55 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503.c: Generic Atmel
at76c503/at76c505 routines v0.12beta11
Oct 29 12:56:55 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503-fw_skel.c: Atmel at76c505
(RFMD 2958) Wireless LAN Driver v0.12beta11 loading
Oct 29 12:56:55 jdoe kernel: usbcore: registered new driver at76c505-rfmd2958
Oct 29 12:56:57 jdoe kernel: usb 1-2: reset full speed USB device
using address 3
Oct 29 12:56:58 jdoe kernel: usb 1-2: device firmware changed
Oct 29 12:56:58 jdoe kernel: usb 1-2: USB disconnect, address 3
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503.c: unable to get descriptor
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503.c: unexpected opmode 237
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503-fw_skel.c: wlan%%d
disconnecting
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503-fw_skel.c: at76c505-rfmd2958
disconnected
Oct 29 12:56:58 jdoe kernel: usb 1-2: new full speed USB device using address 4
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503.c: getting firmware failed
with -32, or version is 0
Oct 29 12:56:58 jdoe kernel:
/usr/src/redhat/BUILD/at76c503a/at76c503.c: this probably means that
the ext. fw was not loaded correctly

-- 
Taymour