RE: incompatible pointer type+Fedora Core 3

"mlpruse" <[email protected]> Tue, 28 Dec 2004 23:57:12 -0600
Newsgroups gmane.linux.drivers.at76c503a.user
Message-ID <[email protected]>
	I got the CVS code from:

 http://cvs.berlios.de/cvstarballs/at76c503a-cvsroot.tar.gz

	Then unzip/tar it and created a cvs and moved the two directors from
this new folder and then did the following:

cvs -d /root/temp/at76c503a/cvs co at76c503a
  
	I assumed that this would give me the CVS code for 2.6.  Please let
me know if the web address is bad or if I missed something.  

	Again, thanks for the help!!



-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of CE
Sent: Monday, December 27, 2004 9:27 PM
To: [email protected]
Subject: Re: [at76c503a-user] incompatible pointer type+Fedora Core 3

	You should be using the CVS code for 2.6.  Once you get that and
your kernel sources do (as root) make, make install.  Then replug your
device and try ifup wlan0


You Wrote:

> Dear All,
> 
> 	I was hoping that someone from this list could help me with my
> Linksys WUSB11 version 2.6 working in Fedora Core 3.  Also, I very new to
> linux. 
> 
> 	The problem I am getting is when I do a make I get the follow
> message:
> 
> At76c503.c
> In function ieee80211_to_eth
> Line 3922
> Warning: Assignment from incompatible pointer type.  
> 
> I have also tried the 0.12beta files and get the same error message.
> Though, I do get the at76c503.o and can do a make install.  After plugging
> in the wireless card, I still do not get the blinking lights that would
> imply that it works.  I then do a dmesg and see that it tries to download
> firmware and after that I get a message:
> 
> At76c503 unexpected opmode 185
> 
> 	I have the KT133 chip set and have not tried a cheap USB hub, short
> on cash.  I did get it working for a short time by upgrading from Redhat
9.0
> to Fedora Core 3 and it was working most of the time until I patched it.
> After patching it I also got the above errors.  I then decided that a
clean
> install might work better, but was wrong.
> 
> 	Any help would be great.
> 
> Thanks,
> Mike            
> 
_______________________________________________
at76c503a-user mailing list
[email protected]
http://lists.berlios.de/mailman/listinfo/at76c503a-user