kernel 2.6.12 - TX packets:0

First of all, thanks very much for this driver. I've been using a USB
Belkin F56050 with success for quite a while now on a VIA EPIA 5000
based server.

However, since Linux kernel 2.6.12 came out (kernel 2.6.11 was working
fine), I've had the problem of connections being made but no data
being transmitted one way. ifconfig shows TX packets:0 always. RX is
ok. My laptop hooks up to the wifi network ok. It transmits, but shows
no received packets.

Is anyone running 2.6.12 with this driver succesfully? 

Notes:
uhci usb driver
kernel config same moving from 2.6.11 to 2.6.12
from dmesg:
Aug 13 12:21:20 epia /root/at76c503a/at76_usbdfu.c: USB Device
Firmware Upgrade (DFU) handler v0.12beta23-static loading
Aug 13 12:21:20 epia /root/at76c503a/at76c503.c: Generic Atmel
at76c503/at76c505 routines v0.12beta23-static
Aug 13 12:21:20 epia /root/at76c503a/at76c503-fw_skel.c: Atmel
at76c503 (RFMD) Wireless LAN Driver v0.12beta23-static loading
Aug 13 12:21:20 epia /root/at76c503a/at76c503-fw_skel.c: using
compiled-in firmware
Aug 13 12:21:20 epia /root/at76c503a/at76c503.c: $Id: at76c503.c,v
1.74 2005/03/08 01:33:14 jal2 Exp $ compiled Aug  2 2005 23:56:25
Aug 13 12:21:20 epia /root/at76c503a/at76c503.c: firmware version
1.101.2 #84 (fcs_len 4)
Aug 13 12:21:20 epia /root/at76c503a/at76c503.c: device's MAC
00:30:bd:66:9c:d7, regulatory domain ETSI (Europe - (Spain+France) (id
48)
Aug 13 12:21:20 epia /root/at76c503a/at76c503.c: registered wlan0

Thanks,

Patrick