Re: BenQ AWL400 - Configured but not working
Timothy Parez <[email protected]>
| Newsgroups | gmane.linux.drivers.at76c503a.user |
|---|---|
| Message-ID | <[email protected]> |
Joerg Albert wrote: >Hi, > >On Sun, 11 Jan 2004, Timothy Parez wrote: > > > >>>your netdev wlan0 is not open, please exec. >>> ifconfig wlan0 ip_address >>>afterwards, otherwise the driver won't activate the device. >>> >>> >>> >>I get this now: >> >>... >>root@linuxtimo:/home/timo# iwconfig wlan0 192.168.0.4 >>Error : unrecognised wireless request "192.168.0.4" >>root@linuxtimo:/home/timo# >> >>The driver must really hate me :p >> >> > >no, your eyes are loosing strength: >_ifconfig_, not _iwconfig_ (see above). > >You previously asked about "dhcp" - haven't got any experience, but IMHO >dhcp opens the netdev as well. The "ifconfig" line should just allow to >let the debug setting become active to get info about the original >problem. > >/Jörg >_______________________________________________ >at76c503a-user mailing list >[email protected] >http://lists.berlios.de/mailman/listinfo/at76c503a-user > > > I'll try :) All this studying is getting me tired, exams are coming up, and I can't seem to get the OSPF protocol into my head :p