Re: Kernel Panic with CVS version

David Haggett <[email protected]>
Newsgroups gmane.linux.drivers.at76c503a.user
Message-ID <[email protected]>
On Monday 22 March 2004 17:24, Joerg Albert wrote:
> Hi,

> > System now working fine with the 0.11 drivers.  Bit worried because I
> > intend to upgrade to SUSE9.1 when it comes out, and this will have Kernel
> > 2.6.x. (my reason for testing the 0.12beta drivers).
>
> if possible try to use uhci instead of usb-uhci.

Well, it didn't crash my PC this time.  I also booted it from cold without the adaptor,
deleted the old modules and ran depmod -a before doing 'make install', but it still
didn't work.

I've enclosed an extract from /var/log/messages showing what happens immediately
after the adaptor is plugged in.

kernel: hub.c: new USB device 00:1f.2-1, assigned address 3
kernel: usb.c: USB device 3 (vend/prod 0xd5c/0xa002) is not claimed by any active driver.
kernel: usbdfu.c: USB Device Firmware Upgrade (DFU) handler v0.12beta9 loading
kernel: at76c503.c: Generic Atmel at76c503/at76c505 routines v0.12beta9
kernel: at76c503-fw_skel.c: Atmel at76c503 (RFMD/Accton) Wireless LAN Driver v0.12beta9 loading
kernel: usb.c: registered new driver at76c503-rfmd-acc
kernel: at76c503-fw_skel.c: using compiled-in firmware
insmod: Using /lib/modules/2.4.21-192-default/kernel/drivers/usb/usbdfu.o
insmod: Symbol version prefix ''
insmod: Using /lib/modules/2.4.21-192-default/kernel/drivers/usb/at76c503.o
insmod: Using /lib/modules/2.4.21-192-default/kernel/drivers/usb/at76c503-rfmd-acc.o
kernel: usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 9 ret -6
kernel: usbdfu.c: dfu_download_block failed with -32
kernel: at76c503.c: downloading internal fw failed with -32

Any ideas?
-- 

David Haggett
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.