Re: ECS Desknote A907, Suse 8.2Pro & Linksys WUSB11 2.6

I know for me I had a lot of problems having an ethnet card in at the same
time, if i remember correctly i assigned my eth card to eth1 and my wireless
device at eth0. it seemed to work i think. i'm not sure why this is, someone
else on this list might know

--- Frank Schlotfeldt <[email protected]> wrote:
> Hello,
> 
> I have a problem getting my Linksys WUSB11 working with Suse 8.2 Pro. I have 
> read the tutorials mentioned in this list, but nothing worked for me.
> 
> After plugging the WUSB11 into my Desknote I get these messages:
> 
> Output of dmesg:
> 
> frank@dhcppc0:~>dmesg
> [...]
> hub.c: new USB device 00:14.0-4, assigned address 3
> usbdfu.c: get_op_mode() failed: -32
> usbdfu.c: downloading firmware
> usbdfu.c: remap
> uusbdfu.c: resetting device
> usbdfu.c: scanning unclaimed devices
> usbdfu.c: op_mode = 4
> usbdfu.c: firmware already loaded
> at76c503.c: downloading external firmware
> at76c503.c: firmware version 0.100.4 #16
> at76c503.c: using MAC 00:06:25:48:49:5f
> at76c503.c: using net device eth1
> 
> Output of /var/log/messages
> 
>  Oct 12 13:02:42 dhcppc0 /etc/hotplug/net.agent[2000]: Using HW description  
>  
> eth-usb-1-2
>  Oct 12 13:02:43 dhcppc0 kernel: hub.c: new USB device 00:14.0-4, assigned
>  address 3
>  Oct 12 13:02:43 dhcppc0 kernel: usbdfu.c: get_op_mode() failed: -32
>  Oct 12 13:02:43 dhcppc0 kernel: usbdfu.c: downloading firmware
>  Oct 12 13:02:43 dhcppc0 kernel: usbdfu.c: remap
>  Oct 12 13:02:45 dhcppc0 kernel: usbdfu.c: resetting device
>  Oct 12 13:02:45 dhcppc0 kernel: usbdfu.c: scanning unclaimed devices
>  Oct 12 13:02:45 dhcppc0 kernel: usbdfu.c: op_mode = 4
>  Oct 12 13:02:45 dhcppc0 kernel: usbdfu.c: firmware already loaded
>  Oct 12 13:02:45 dhcppc0 kernel: at76c503.c: downloading external firmware
>  Oct 12 13:02:45 dhcppc0 kernel: at76c503.c: firmware version 0.100.4 #16
>  Oct 12 13:02:45 dhcppc0 kernel: at76c503.c: using MAC 00:06:25:48:49:5f
>  Oct 12 13:02:45 dhcppc0 kernel: at76c503.c: using net device eth1
>  Oct 12 13:02:48 dhcppc0 /etc/hotplug/usb.agent[2164]: writing usb-1-3 to
>  /var/run/hotplug/net
>  Oct 12 13:02:49 dhcppc0 /etc/hotplug/net.agent[2154]: Using HW description
>  eth-usb-1-3
>  Oct 12 13:02:49 dhcppc0 ifup-wireless: command 'iwconfig eth1 nick dhcppc0'
>  returned
>  Oct 12 13:02:49 dhcppc0 ifup-wireless: Error for wireless request "Set
>  Nickname" (8B1C) :
>  Oct 12 13:02:49 dhcppc0 ifup-wireless: SET failed on device eth1 ;
>  Operation not supported.
>  Oct 12 13:03:01 dhcppc0 kernel: eth1: no IPv6 routers present
> 
> The ECS Desknote A907 runs on a Transmeta CPU with an ALI 1535+ Chipset.
> 
> For my knowledge I am out of options and I hope that anyone can help me out.
> 
> Thanks a lot,
> 
> Frank
> _______________________________________________
> Atmel-wlan-usb mailing list
> Atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
> https://iprserv.jura.uni-leipzig.de/mailman/listinfo/atmel-wlan-usb


__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com