RE: Netgear MA 101 reset failed

Aye Diego,

	I can't say much about the RH 7.3 or the sourceforge drivers.  I was
using Redhat 9.0 and a Linksys Wireless USB Adapter (WUSB11 ver2.6).  I
tried to use the sourceforge driver and that worked sometimes.  But, I fo=
und
that the driver at the below sight worked better. =20
=20
http://at76c503a.berlios.de/#downl

	Also, I am not sure that the current release of the sourceforge
drivers works with the Atmel chipset anymore.  Though, I am having proble=
m
getting the berlios.de drivers working under Fedora Core 3.  =20


>From berlios.de:

This driver suppports Intersil radios (and will do so in the future) whil=
e
the Sourceforge driver dropped it in December 2002 due to the Atmel
company's support policy :-(. =20

I hope that help.





-----Original Message-----
From: atmel-wlan-usb-bounces-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
[mailto:atmel-wlan-usb-bounces-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org] On Behalf Of
Diego Rodrigo
Sent: Wednesday, January 05, 2005 8:49 AM
To: atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
Subject: [Atmel-WLAN-USB] Netgear MA 101 reset failed

Hi,
    i=B4m using the drivers at http://atmelwlandriver.sourceforge.net
(version 3.4.1.0) on RH 7.3 with kernel 2.4.28.

I have compiled the drivers and installed the modules, but when I plug
the device (Netgear MA101 rev.B) I dont get an ethernet device
attached to it, but I get this error:

    vnet.c Device Reset failed
    vnetusba.c device initialization failed

Can anyone help me with this error?

thanks...
diego.

_______________________________________________
Atmel-wlan-usb mailing list
Atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
https://iprserv.jura.uni-leipzig.de/mailman/listinfo/atmel-wlan-usb