Re: Netgear MA 101 reset failed

Diego Rodrigo <[email protected]> Thu, 6 Jan 2005 12:17:26 -0300
Newsgroups gmane.linux.drivers.atmel-wlan
Message-ID <[email protected]>
Yes you were right, thanks!

I have dowloaded the driver at berilios.de, complied it, installed it,
and after some 15 minutes of trial-and-error with iwconfig + ifconfig
i had the network up and running with encryption (in managed mode).

Thanks a lot!!!
diego.



On Wed, 5 Jan 2005 12:55:39 -0600, mlpruse <[email protected]> wrote:
> Aye Diego,
>=20
>         I can't say much about the RH 7.3 or the sourceforge drivers.  =
I was
> using Redhat 9.0 and a Linksys Wireless USB Adapter (WUSB11 ver2.6).  I
> tried to use the sourceforge driver and that worked sometimes.  But, I =
found
> that the driver at the below sight worked better.
>=20
> http://at76c503a.berlios.de/#downl
>=20
>         Also, I am not sure that the current release of the sourceforge
> drivers works with the Atmel chipset anymore.  Though, I am having prob=
lem
> getting the berlios.de drivers working under Fedora Core 3.
>=20
> From berlios.de:
>=20
> This driver suppports Intersil radios (and will do so in the future) wh=
ile
> the Sourceforge driver dropped it in December 2002 due to the Atmel
> company's support policy :-(.
>=20
> I hope that help.
>=20
>=20
> -----Original Message-----
> From: atmel-wlan-usb-bounces-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
> [mailto:atmel-wlan-usb-bounces-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org] On Behalf O=
f
> Diego Rodrigo
> Sent: Wednesday, January 05, 2005 8:49 AM
> To: atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
> Subject: [Atmel-WLAN-USB] Netgear MA 101 reset failed
>=20
> Hi,
>     i=B4m using the drivers at http://atmelwlandriver.sourceforge.net
> (version 3.4.1.0) on RH 7.3 with kernel 2.4.28.
>=20
> I have compiled the drivers and installed the modules, but when I plug
> the device (Netgear MA101 rev.B) I dont get an ethernet device
> attached to it, but I get this error:
>=20
>     vnet.c Device Reset failed
>     vnetusba.c device initialization failed
>=20
> Can anyone help me with this error?
>=20
> thanks...
> diego.
>=20
> _______________________________________________
> Atmel-wlan-usb mailing list
> Atmel-wlan-usb-ikZNBd7uB5wQUIZIPwn63sWURRETrGNnG9Ur7JDdleE@public.gmane.org
> https://iprserv.jura.uni-leipzig.de/mailman/listinfo/atmel-wlan-usb
>