Repeatit RS/3 Client Terminal and Mandrake 10.1

Hi

I've phurcased a wlan-adapter Repeatit RS/3 Client Terminal.
(swedish manufacturer). It's on usb, and using Atmel AT76C503A. Linux 
reports the vendorID as 0x3eb and productID as 0x7604.
I am using Mandrake 10.1.
When I hooked up the modem it come up in usbview as at76c503-i3863,
but after two seconds it is going red!
Command iwconfig show no adapter.
This is  the errors log:
Feb 13 19:50:41 localhost kernel: audit(1108324214.4294967226:0): 
initialized
Feb 13 19:56:04 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 19:56:04 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 19:56:05 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 19:56:05 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:08:52 localhost kernel: audit(1108325273.4294966992:0): 
initialized
Feb 13 20:08:52 localhost kernel: usb 1-2: device not accepting address 
3, error -84
Feb 13 20:08:52 localhost kernel: usb 1-2: device not accepting address 
4, error -110
Feb 13 20:08:52 localhost kernel: usb 1-2: device not accepting address 
5, error -110
Feb 13 20:08:52 localhost kernel: usb 1-2: device not accepting address 
6, error -110
Feb 13 20:13:47 localhost kernel: usb 1-2: device not accepting address 
3, error -84
Feb 13 20:13:47 localhost kernel: usb 1-2: device not accepting address 
4, error -84
Feb 13 20:14:45 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:14:45 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:14:45 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 20:14:45 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:22:42 localhost kernel: audit(1108326116.144:0): initialized
Feb 13 20:22:42 localhost kernel: usb 1-2: device not accepting address 
3, error -110
Feb 13 20:22:42 localhost kernel: usb 1-2: device not accepting address 
4, error -110
Feb 13 20:25:34 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:25:34 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:25:34 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 20:25:34 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:26:56 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:26:56 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:26:56 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 20:26:56 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:27:25 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:27:25 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:27:26 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with -110, or version is 0
Feb 13 20:27:26 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:27:38 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:27:38 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:27:39 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 20:27:39 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:28:02 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 20:28:02 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 20:28:03 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 20:28:03 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 20:28:17 localhost kernel: usb 1-1: invalid descriptor for config 
index 0: type = 0x0, length = 0
Feb 13 20:28:17 localhost kernel: usb 1-1: can't read configurations, 
error -22
Feb 13 21:00:30 localhost kernel: audit(1108328383.175:0): initialized
Feb 13 21:00:30 localhost kernel: usb 1-1: device descriptor read/all, 
error -71
Feb 13 21:00:30 localhost kernel: usb 1-1: device not accepting address 
3, error -71
Feb 13 21:00:30 localhost kernel: usb 1-2: device not accepting address 
4, error -110
Feb 13 21:00:30 localhost kernel: usb 1-2: device not accepting address 
5, error -110
Feb 13 21:02:07 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 21:02:07 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 21:02:07 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 21:02:07 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 21:05:54 localhost kernel: audit(1108328707.344:0): initialized
Feb 13 21:05:54 localhost kernel: usb 1-1: device not accepting address 
2, error -71
Feb 13 21:05:54 localhost kernel: usb 1-1: device not accepting address 
3, error -71
Feb 13 21:05:54 localhost kernel: usb 1-2: device not accepting address 
4, error -110
Feb 13 21:05:54 localhost kernel: usb 1-2: device not accepting address 
5, error -110
Feb 13 21:07:22 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 21:07:22 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 237
Feb 13 21:07:23 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 21:07:23 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 21:20:32 localhost kernel: usb 1-2: device not accepting address 
3, error -108
Feb 13 21:20:32 localhost kernel: hub 1-0:1.0: cannot disable port 2 
(err = -19)
Feb 13 21:20:32 localhost kernel: hub 1-0:1.0: cannot reset port 2 (err 
= -19)
Feb 13 21:20:32 localhost last message repeated 4 times
Feb 13 21:20:32 localhost kernel: hub 1-0:1.0: Cannot enable port 2.  
Maybe the USB cable is bad?
Feb 13 21:20:32 localhost kernel: hub 1-0:1.0: cannot disable port 2 
(err = -19)
Feb 13 21:20:32 localhost kernel: Unable to handle kernel NULL pointer 
dereference at virtual address 00000008
Feb 13 21:20:32 localhost kernel:  printing eip:
Feb 13 21:20:32 localhost kernel: *pde = 00000000
Feb 13 21:20:32 localhost kernel: Oops: 0000 [#1]
Feb 13 21:25:47 localhost kernel: audit(1108329910.073:0): initialized
Feb 13 21:25:47 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 21:25:47 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 185
Feb 13 21:25:47 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with -110, or version is 0
Feb 13 21:25:47 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly
Feb 13 22:44:52 localhost kernel: audit(1108334659.917:0): initialized
Feb 13 22:44:52 localhost kernel: 3rdparty/at76c503a/at76c503.c: unable 
to get descriptor
Feb 13 22:44:52 localhost kernel: 3rdparty/at76c503a/at76c503.c: 
unexpected opmode 185
Feb 13 22:44:52 localhost kernel: 3rdparty/at76c503a/at76c503.c: getting 
firmware failed with 0, or version is 0
Feb 13 22:44:52 localhost kernel: 3rdparty/at76c503a/at76c503.c: this 
probably means that the ext. fw was not loaded correctly

Any suggestions on what I should do appreciated.

Thanks!

Kjell Andersson
Sweden