Re: Problems connecting Ether Express Cards to switch

Donald Becker <[email protected]>
Newsgroups gmane.linux.drivers.eepro100.devel
Message-ID <[email protected]>
On Tue, 27 Aug 2002, D. Sen wrote:

> I have three computers in my local home network. Two of them have Intel 
> Ethernet PCI cards (a desktop and a laptop) that refuses to talk to an 
> external switch.
> 
> I have tried two switches now (an 8 port Linksys and an 8 port Netgear). 
> The third computer which has a 3Com NIC works fine with the switches. 
> Also, all three NICs work fine with a hub. So....its something specific 
> to the interface between the EE Pro cards and the switch.

What does 'mii-diag' report?

> Is this a FAQ? I tried looking through the recent archives but failed to 
> find the answer.

No, this is a very uncommon problem.
The closest problem is DHCP failing due to autonegotiation delays, which
will have the effect of the network being unreachable.

Another problem -- very unlikely with a home network -- is that the
connection to a Cisco switch won't work for about a minute after
plugging in because of a discovery protocol.  Plugging in through an
always-on repeater avoids triggering the link-up-triggered discovery.

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.