Re: SMC9432TX/MP Not recognised by PCI bus.

On Fri, 2 Aug 2002, Bill Adair wrote:

> Has anybody seen anything like this before?
> The pc is based on a Gigabyte 586DX motherboard with two p200s.
.
> <4>PCI: Device 00:50 not found by BIOS

Curious... try moving the slot.

[[ Note that this message is obviously misformated.  PCI device IDs
range from 0..31.  The "devfn" field is split
   5 device bits
   3 function bits.
with
   8 bus bits

BBBB BBBB DDDD DFFF

> Output of lspci -vvx....

> 00:0a.0 Ethernet controller: Standard Microsystems Corp [SMC] 83C170QF (rev
> 08)
> !!! Unknown header type 7f
> 00: b8 10 05 00 00 00 90 80 08 00 00 02 ff ff ff ff
> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

Check that this device is plugged into the slot, or just try another PCI
slot.

> Jul 31 11:55:49 linux kernel: epic100.c:v1.11 1/7/2001 Written by Donald
> Becker <[email protected]>
> Jul 31 11:55:49 linux kernel: http://www.scyld.com/network/epic100.html
> 
> Jul 31 11:55:49 linux kernel: (unofficial 2.4.x kernel port, version
> 1.11+LK1.1.12, Jan 18, 2002)
> Jul 31 11:55:49 linux kernel: card 0: no PCI region space

Note that the current version is 1.16 6/22/2002.
Recent changes have been to better handle transceiver selection and
power, especially with hot-swap and suspend/resume.

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
410 Severn Ave. Suite 210		Second Generation Beowulf Clusters
Annapolis MD 21403			410-990-9993