Re: SMC9432TX/MP Not recognised by PCI bus.

I swapped the card from slot to slot and the number (as below) changed
00:48, 00:40.
> > <4>PCI: Device 00:50 not found by BIOS
I then had the sense to check if the BIOS pci bus display (before boot)
showed the card.
It didn't and a second machine couldn't find the beastie either. Interesting
that enough of the card worked enough to "show" itself to linux and light up
it's leds on the back.
Perhaps I should be more suspicious of only one supplier having the card in
stock in the UK. A return perhaps?
Thanks for your help.
Bill Adair

----- Original Message -----
From: "Donald Becker" <[email protected]>
To: "Bill Adair" <[email protected]>
Cc: <[email protected]>
Sent: Friday, August 02, 2002 5:47 PM
Subject: Re: [epic] SMC9432TX/MP Not recognised by PCI bus.


> On Fri, 2 Aug 2002, Bill Adair wrote:
>
> > Has anybody seen anything like this before?
> > The pc is based on a Gigabyte 586DX motherboard with two p200s.
> .
> > <4>PCI: Device 00:50 not found by BIOS
>
> Curious... try moving the slot.
>
> [[ Note that this message is obviously misformated.  PCI device IDs
> range from 0..31.  The "devfn" field is split
>    5 device bits
>    3 function bits.
> with
>    8 bus bits
>
> BBBB BBBB DDDD DFFF
>
> > Output of lspci -vvx....
>
> > 00:0a.0 Ethernet controller: Standard Microsystems Corp [SMC] 83C170QF
(rev
> > 08)
> > !!! Unknown header type 7f
> > 00: b8 10 05 00 00 00 90 80 08 00 00 02 ff ff ff ff
> > 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>
> Check that this device is plugged into the slot, or just try another PCI
> slot.
>
> > Jul 31 11:55:49 linux kernel: epic100.c:v1.11 1/7/2001 Written by Donald
> > Becker <[email protected]>
> > Jul 31 11:55:49 linux kernel: http://www.scyld.com/network/epic100.html
> >
> > Jul 31 11:55:49 linux kernel: (unofficial 2.4.x kernel port, version
> > 1.11+LK1.1.12, Jan 18, 2002)
> > Jul 31 11:55:49 linux kernel: card 0: no PCI region space
>
> Note that the current version is 1.16 6/22/2002.
> Recent changes have been to better handle transceiver selection and
> power, especially with hot-swap and suspend/resume.
>
> --
> Donald Becker [email protected]
> Scyld Computing Corporation http://www.scyld.com
> 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
> Annapolis MD 21403 410-990-9993
>