Re: commands, responses and log

gilberto dos santos alves <[email protected]> Wed, 14 Dec 2016 21:28:50 -0200
Newsgroups gmane.linux.drivers.gammu
Message-ID <CAP9G-N+FczE=ba+Rs+CpTTikH8CGqnTTa3GZk5_-X9tcgGVYSg@mail.gmail.com>
congratulations! now that we have commands working and log we cold read and
analyze!

--
gilberto dos santos alves
+55(11)9-8646-5049
sao paulo - sp - brasil





2016-12-14 7:58 GMT-02:00 Sylvain Ard <[email protected]>:

> Hi,
>
> OK I have change my config file to :
>
> device=/dev/ttyUSB0
> connection = at
> logfile = /home/pi/gammuraspy.log
> logformat = textalldate
> gammucoding = utf8
>
> Then I run these commands and got theses results :
>
> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
> Erreur à l'ouverture du périphérique : périphérique inconnu, occupé ou
> problème de permissions.
> pi@raspberrypi:~ $ sudo service gammu-smsd stop
> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
> Périphérique       : /dev/ttyUSB0
> Fabricant            : Huawei
> Modèle              : E169 (E169)
> Firmware             : 11.314.13.51.156
> IMEI                 : 359638018980742
> SIM IMSI             : 208150009082056
>
> Then I tried to send a sms :
> I got :
>
> pi@raspberrypi:~ $ echo "SMS" | gammu --sendsms TEXT 0778380991
> If you want break, press Ctrl+C...
> Sending SMS 1/1....waiting for network answer..erreur 500, message
> reference=-1
> Erreur inconnue.
>
> I join the log
> Thank you
> Bye
>
>
>
> 2016-12-14 10:36 GMT+01:00 Michal Čihař <[email protected]>:
>
>> Hi
>>
>> Sylvain Ard píše v Po 12. 12. 2016 v 19:42 +0100:
>> > Hi,
>> > I do what Gilberto Dos Santos Alves said but I got :
>> >
>> > pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
>> > Warning: Configuration could not be parsed!
>> > Avertissement: No configuration read, using builtin defaults!
>> > Erreur à l'ouverture du périphérique: il n'existe pas.
>> > and my gammurc.cfg is :
>> >
>> > connection = at19200
>> > logfile = /home/pi/gammuraspy.log
>> > logformat = textalldate
>> > gammucoding = utf8
>> > I tried with free, at and at19200 but I got always the same error
>> > Thank you for helping me
>>
>> Your file is missing [gammu] section header, see our docs:
>>
>> https://wammu.eu/docs/manual/config/index.html#examples
>>
>> --
>>         Michal Čihař | https://cihar.com/ | https://weblate.org/
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gammu-users mailing list - https://lists.sourceforge.net/
>> lists/listinfo/gammu-users
>>
>>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Gammu-users mailing list - https://lists.sourceforge.net/
> lists/listinfo/gammu-users
>
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users