Re: commands, responses and log

but i understand you already go to step that send sms, and i tell that this
example that is on gammu manual is not good to explain what is going on.
why?
because we need step by step to understand things lets go avanti!

put on gammu command explicit place where you want write your log file,
what name and extension you want for your logfile, what type log you want
and what level (1 to 255 (255 is very details)), so my advice for teste
your sms:

gammu -c /path/your-config-gammurc -d textall -f
/path/your-log-file-for-sms.log sendsms TEXT number-destination
'your-message-delimited-by-apost'

--
gilberto dos santos alves
+55(11)9-8646-5049
sao paulo - sp - brasil





2016-12-14 21:28 GMT-02:00 gilberto dos santos alves <[email protected]>:

> congratulations! now that we have commands working and log we cold read
> and analyze!
>
> --
> gilberto dos santos alves
> +55(11)9-8646-5049
> sao paulo - sp - brasil
>
>
>
>
>
> 2016-12-14 7:58 GMT-02:00 Sylvain Ard <[email protected]>:
>
>> Hi,
>>
>> OK I have change my config file to :
>>
>> device=/dev/ttyUSB0
>> connection = at
>> logfile = /home/pi/gammuraspy.log
>> logformat = textalldate
>> gammucoding = utf8
>>
>> Then I run these commands and got theses results :
>>
>> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
>> Erreur à l'ouverture du périphérique : périphérique inconnu, occupé ou
>> problème de permissions.
>> pi@raspberrypi:~ $ sudo service gammu-smsd stop
>> pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
>> Périphérique       : /dev/ttyUSB0
>> Fabricant            : Huawei
>> Modèle              : E169 (E169)
>> Firmware             : 11.314.13.51.156
>> IMEI                 : 359638018980742
>> SIM IMSI             : 208150009082056
>>
>> Then I tried to send a sms :
>> I got :
>>
>> pi@raspberrypi:~ $ echo "SMS" | gammu --sendsms TEXT 0778380991
>> If you want break, press Ctrl+C...
>> Sending SMS 1/1....waiting for network answer..erreur 500, message
>> reference=-1
>> Erreur inconnue.
>>
>> I join the log
>> Thank you
>> Bye
>>
>>
>>
>> 2016-12-14 10:36 GMT+01:00 Michal Čihař <[email protected]>:
>>
>>> Hi
>>>
>>> Sylvain Ard píše v Po 12. 12. 2016 v 19:42 +0100:
>>> > Hi,
>>> > I do what Gilberto Dos Santos Alves said but I got :
>>> >
>>> > pi@raspberrypi:~ $ gammu -c /home/pi/gammurc.cfg identify
>>> > Warning: Configuration could not be parsed!
>>> > Avertissement: No configuration read, using builtin defaults!
>>> > Erreur à l'ouverture du périphérique: il n'existe pas.
>>> > and my gammurc.cfg is :
>>> >
>>> > connection = at19200
>>> > logfile = /home/pi/gammuraspy.log
>>> > logformat = textalldate
>>> > gammucoding = utf8
>>> > I tried with free, at and at19200 but I got always the same error
>>> > Thank you for helping me
>>>
>>> Your file is missing [gammu] section header, see our docs:
>>>
>>> https://wammu.eu/docs/manual/config/index.html#examples
>>>
>>> --
>>>         Michal Čihař | https://cihar.com/ | https://weblate.org/
>>>
>>> ------------------------------------------------------------
>>> ------------------
>>> Check out the vibrant tech community on one of the world's most
>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>> _______________________________________________
>>> Gammu-users mailing list - https://lists.sourceforge.net/
>>> lists/listinfo/gammu-users
>>>
>>>
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gammu-users mailing list - https://lists.sourceforge.net/
>> lists/listinfo/gammu-users
>>
>>
>

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most 
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Gammu-users mailing list - https://lists.sourceforge.net/lists/listinfo/gammu-users