Re: Siemens MC35i

  Citat af Daniele Forsi <[email protected]>:

> 2014-08-03 21:40 GMT+02:00 Peter Øgaard Meyland:
>
>> Hmm, could it be a problem with the terminal. I.e. an unsupported or
>> missing
>> function in the MC35i firmware??
>
> yes, that's most likely, change debug to on in your config (it is off
> by default):
>
> [logging]
> # where to log the debug output (on: stderr, off: /dev/null)
> debug = on
>
> then repeat the command, it will show if the terminal doesn't know the
> command or if libgnokii doesn't know how to handle the answer (and in
> fact now I see that it still doen'st *parse* this answer, but you
> should get a success without number as you noted, not a failure, if
> the phone supports AT+CCFC)
>
> according to the standard document GSM 02.30, call diversions are
> handled optionally also as part of ATD with the same syntax you use on
> a phone such as ATD**61*+1234567890*11*25#
>
> --
> Daniele Forsi
>
> _______________________________________________
> gnokii-users mailing list
>
[email protected]://lists.nongnu.org/mailman/listinfo/gnokii-users

Thank you for clearing thins out for me. 

If I turn debug on I can see that the AT+CCFC command are unknow for the
MC35i:
  /41 54 2b 43 43 46 43 3d 35 2c 32 0d             | AT+CCFC=5,2/
  /write: [AT+CCFC=5,2<cr>]/
  /read : [^@^D+CCFC=5,2<cr><cr><lf>+CME ERROR: 4<cr><lf>]/
  /Message received: 0x28 / 0x001d/
  /05 00 04 2b 43 43 46 43 3d 35 2c 32 0d 0d 0a 2b |    +CCFC=5,2   +/
  /43 4d 45 20 45 52 52 4f 52 3a 20 34 0d          | CME ERROR: 4/
  /Received message type 28/

I rest my case and I am sorry for the trouble. I think I will try with
another (Nokia) cell phone

regards,

Peter

_______________________________________________
gnokii-users mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/gnokii-users