[SLE] Re: [hpoj-devel] [SLE] How to print from WP8 for Linux

Meisch, Cory wrote:

>Are there any messages in the /var/log/cups/error_log?
>
>Cory
>
>On Fri, 2004-06-11 at 06:07, Andre den Oudsten wrote:
>  
>
>>I use WordPerfect 8 for Linux on a machine with
>>SuSE 9.0 with hpoj-0.90-363 and CUPS installed
>>Printer PSC2110 is installed with ptal conform HP OfficeJet Information 
>>for SuSE Linux 9.0 and Newer Versions
>>In WP I installed HP DeskJet 500C (Color Pen) with destination psc2100series
>>When I try to print I get message  'Error Spool Command'
>>What to do?
>>    
>>
Sorry that I react so late. It's due to some days of holyday.
There is 532kB of messages in /var/log/cups/error_log
Meanwhile I configured two other queues. So I have:

Personal Printer with  HP DeskJet 500c (Black Pen) and destination 
psc2100series (installed with Yast)
Personal Printer with  HP DeskJet 500c (Black Pen) and destination PSC2110
Personal Printer with  HP DeskJet 500c (Color Pen) and destination 
psc2100series (installed with Yast)
Personal Printer with  HP DeskJet 500c (Color Pen) and destination PSC2110
System  Printer with  HP DeskJet 500c (Color Pen) and destination WP Spool
System Printer with Passthru PostScript and destination WPSpool

Printing with the first gave 'Error Spool Command' and in /error_log:
The starting of the system
I [25/Jun/2004:10:16:09 +0200] Listening to 0:631
I [25/Jun/2004:10:16:09 +0200] Loaded configuration file 
"/etc/cups/cupsd.conf"
I [25/Jun/2004:10:16:09 +0200] Configured for up to 100 clients.
I [25/Jun/2004:10:16:09 +0200] Allowing up to 100 client connections per 
host.
I [25/Jun/2004:10:16:09 +0200] Full reload is required.
E [25/Jun/2004:10:16:10 +0200] LoadDevices: Bad line from "usb": direct 
usb://Hewlett-Packard0MDL:PSC/2100%20Series0CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0;%20PSC%202100%20Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0; 
"Hewlett-Packard0MDL:PSC 2100 
Series0CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0; 
PSC 2100 
Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0;" 
"USB Printer #1"
I [25/Jun/2004:10:16:14 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 3166 
PPDs...
I [25/Jun/2004:10:16:19 +0200] LoadPPDs: No new or changed PPDs...
I [25/Jun/2004:10:16:19 +0200] Full reload complete.

and the reaction after print command in WP
E [25/Jun/2004:11:34:30 +0200] print_job: Unsupported format 
'application/octet-stream'!
I [25/Jun/2004:11:34:30 +0200] Hint: Do you have the raw file printing 
rules enabled?
E [25/Jun/2004:11:34:31 +0200] print_job: Unsupported format 
'application/octet-stream'!
I [25/Jun/2004:11:34:31 +0200] Hint: Do you have the raw file printing 
rules enabled?
E [25/Jun/2004:11:34:31 +0200] print_job: Unsupported format 
'application/octet-stream'!
I [25/Jun/2004:11:34:31 +0200] Hint: Do you have the raw file printing 
rules enabled?

After printing with  PSC2110 gave also 'Error Spool Command' and in 
/error_log
E [25/Jun/2004:12:07:30 +0200] print_job: Unsupported format 
'application/octet-stream'!
I [25/Jun/2004:12:07:30 +0200] Hint: Do you have the raw file printing 
rules enabled?

So did the following 3 confogurations.
The Passthru PostScript  gave no message in WP and in /error_log

I [25/Jun/2004:12:49:03 +0200] Adding start banner page "none" to job 264.
I [25/Jun/2004:12:49:03 +0200] Adding end banner page "none" to job 264.
I [25/Jun/2004:12:49:03 +0200] Job 264 queued on 'psc2100series' by 
'andredo'.

Printing a .RTF file prints directly, but only full lines of random 
characters.

Hopefully you can do something with these observations.

André den Oudsten