Re: [SLE] How to print from WP8 for Linux
Cory Meisch <[email protected]>
| Newsgroups | gmane.linux.drivers.hpofficejet.devel,gmane.linux.suse.general |
|---|---|
| Message-ID | <[email protected]> |
Are there any other printers to choose from? The 900 series would be a better match... Cory hp linux printing team On Fri, 2004-06-25 at 03:59, Andre den Oudsten wrote: > > Meisch, Cory wrote: > > Are there any messages in the /var/log/cups/error_log? > > > > Cory > > > > On Fri, 2004-06-11 at 06:07, Andre den Oudsten wrote: > > > > > I use WordPerfect 8 for Linux on a machine with > > > SuSE 9.0 with hpoj-0.90-363 and CUPS installed > > > Printer PSC2110 is installed with ptal conform HP OfficeJet Information > > > for SuSE Linux 9.0 and Newer Versions > > > In WP I installed HP DeskJet 500C (Color Pen) with destination psc2100series > > > When I try to print I get message 'Error Spool Command' > > > What to do? > > > > Sorry that I react so late. It's due to some days of holyday. > There is 532kB of messages in /var/log/cups/error_log > Meanwhile I configured two other queues. So I have: > > Personal Printer with HP DeskJet 500c (Black Pen) and destination > psc2100series (installed with Yast) > Personal Printer with HP DeskJet 500c (Black Pen) and destination > PSC2110 > Personal Printer with HP DeskJet 500c (Color Pen) and destination > psc2100series (installed with Yast) > Personal Printer with HP DeskJet 500c (Color Pen) and destination > PSC2110 > System Printer with HP DeskJet 500c (Color Pen) and destination WP > Spool > System Printer with Passthru PostScript and destination WPSpool > > Printing with the first gave 'Error Spool Command' and in /error_log: > The starting of the system > I [25/Jun/2004:10:16:09 +0200] Listening to 0:631 > I [25/Jun/2004:10:16:09 +0200] Loaded configuration file > "/etc/cups/cupsd.conf" > I [25/Jun/2004:10:16:09 +0200] Configured for up to 100 clients. > I [25/Jun/2004:10:16:09 +0200] Allowing up to 100 client connections > per host. > I [25/Jun/2004:10:16:09 +0200] Full reload is required. > E [25/Jun/2004:10:16:10 +0200] LoadDevices: Bad line from "usb": > direct > usb://Hewlett-Packard0MDL:PSC/2100%20Series0CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0;%20PSC%202100%20Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0; "Hewlett-Packard0MDL:PSC 2100 Series0CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0; PSC 2100 Series;CMD:MLC,PCL,PML,DW-PCL,DYN;CLS:PRINTER;1284.4DL:4d,4e,1;SN:MY35BF43860F;S:0380008084021000002c1480037c2500014;AiO:0;" "USB Printer #1" > I [25/Jun/2004:10:16:14 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", > 3166 PPDs... > I [25/Jun/2004:10:16:19 +0200] LoadPPDs: No new or changed PPDs... > I [25/Jun/2004:10:16:19 +0200] Full reload complete. > > and the reaction after print command in WP > E [25/Jun/2004:11:34:30 +0200] print_job: Unsupported format > 'application/octet-stream'! > I [25/Jun/2004:11:34:30 +0200] Hint: Do you have the raw file printing > rules enabled? > E [25/Jun/2004:11:34:31 +0200] print_job: Unsupported format > 'application/octet-stream'! > I [25/Jun/2004:11:34:31 +0200] Hint: Do you have the raw file printing > rules enabled? > E [25/Jun/2004:11:34:31 +0200] print_job: Unsupported format > 'application/octet-stream'! > I [25/Jun/2004:11:34:31 +0200] Hint: Do you have the raw file printing > rules enabled? > > After printing with PSC2110 gave also 'Error Spool Command' and in > /error_log > E [25/Jun/2004:12:07:30 +0200] print_job: Unsupported format > 'application/octet-stream'! > I [25/Jun/2004:12:07:30 +0200] Hint: Do you have the raw file printing > rules enabled? > > So did the following 3 confogurations. > The Passthru PostScript gave no message in WP and in /error_log > > I [25/Jun/2004:12:49:03 +0200] Adding start banner page "none" to job > 264. > I [25/Jun/2004:12:49:03 +0200] Adding end banner page "none" to job > 264. > I [25/Jun/2004:12:49:03 +0200] Job 264 queued on 'psc2100series' by > 'andredo'. > > Printing a .RTF file prints directly, but only full lines of random > characters. > > Hopefully you can do something with these observations. > > André den Oudsten ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com