(no subject)

Hi Folks,

I have used an HP OfficeJet 5110 with hpoj successfully for more than 
one year on a SuSE Linux 8.2 System with vanilla Kernel

Here's what uname -a reports: Linux matze 2.4.20-4GB-athlon #1 Mon Mar 
17 17:56:47 UTC 2003 i686 unknown unknown GNU/Linux

Then I got a new HP OfficeJet 5510, and since I did that I can not 
print anymore, even after installing the latest version of hpoj 0.91 
and hpijs 1.6

I did a complete ptal-init setup which went through ok.

here's the diagnostic

ptal-device
mlc:usb:officejet_5500_series

ptal-hp device
Model name:        officejet 5500 series
Model number:      Q3435A
Serial number:     MY418F20Y896
Firmware version:  R0036xxNx
Firmware datecode: (unavailable)


ptal-hp clock
Device clock: 7-Jul-2004 23:02:55

The echo service of the device is working as well and I can use the 
scanner !

But when I try to print I get the following errors in /var/log/messages

----- snip ------
Jul  7 21:17:30 matze ptal-mlcd: SYSLOG at ExMgr.cpp:701, 
dev=<mlc:usb:officejet_5500_series>, pid=21110, e=2         ptal-mlcd 
successfully initialized. Jul  7 21:17:30 matze ptal-printd: 
ptal-printd(mlc:usb:officejet_5500_series) successfully initialized 
using /var/run/ptal-printd/mlc_usb_officejet_5500_series*.

Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=vmnet8 OUT= 
MAC= SRC=192.168.212.1 DST=192.168.212.255 LEN=189 TOS=0x00 PREC=0x00 
TTL=64 ID=3327 DF PROTO=UDP SPT=631 DPT=631 LEN=169

Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=eth1 OUT= MAC= 
SRC=192.168.22.1 DST=192.168.22.255 LEN=188 TOS=0x00 PREC=0x00 TTL=64 
ID=3328 DF PROTO=UDP SPT=631 DPT=631 LEN=168

Jul  7 21:17:36 matze kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=eth0 OUT= 
MAC= SRC=192.168.50.1 DST=192.168.50.255 LEN=181 TOS=0x00 PREC=0x00 
TTL=64 ID=3329 DF PROTO=UDP SPT=631 DPT=631 LEN=161

Jul  7 21:17:37 matze ptal-mlcd: ERROR at ExMgr.cpp:2469, 
dev=<mlc:usb:officejet_5500_series@/dev/usb/lp6>, pid=21110, e=19       
   Couldn't find device: llioOpenOne failed!
----- snip -------

I have then  changed the line in the ptal configuration 
/etc/ptal/mlc:usb:officejet_5500_series to be init.mlcd.append+=-device 
/dev/usb/lp0

Now I don't get any messages anymore, but the ptal-connect -print 
command still returns failed.

When I switch the printer off and on again my current terminal shows 
the following messages:

----- snip ---
ptal-mlcd: ERROR at ExMgr.cpp:2744, 
dev=<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=30270, e=19
llioService: llioRead returns -1, expected=6!

ptal-mlcd: ERROR at ExMgr.cpp:902, 
dev=<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=30270, e=19
exClose(reason=0x0010)
---- snip -----

It would be great if someone coult help me out here !

Thanks in advance

Matthias Schorer

Stiftsbogen 31, 81375 München, Germany
Tel: +49 89 5796 7923
Fax: + 49 89 5796 7925
Mobile: +49 172 853 5093



-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com