Re: (no subject)

Did you compile from source or is this an RPM? If source, be sure to
install the libusb-devel package prior to compiling...

Cory
hp linux printing team

On Wed, 2004-07-07 at 14:14, Matthias Schorer wrote:
> Hi Folks,
> 
> I have used an HP OfficeJet 5110 with hpoj successfully for more than 
> one year on a SuSE Linux 8.2 System with vanilla Kernel
> 
> Here's what uname -a reports: Linux matze 2.4.20-4GB-athlon #1 Mon Mar 
> 17 17:56:47 UTC 2003 i686 unknown unknown GNU/Linux
> 
> Then I got a new HP OfficeJet 5510, and since I did that I can not 
> print anymore, even after installing the latest version of hpoj 0.91 
> and hpijs 1.6
> 
> I did a complete ptal-init setup which went through ok.
> 
> here's the diagnostic
> 
> ptal-device
> mlc:usb:officejet_5500_series
> 
> ptal-hp device
> Model name:        officejet 5500 series
> Model number:      Q3435A
> Serial number:     MY418F20Y896
> Firmware version:  R0036xxNx
> Firmware datecode: (unavailable)
> 
> 
> ptal-hp clock
> Device clock: 7-Jul-2004 23:02:55
> 
> The echo service of the device is working as well and I can use the 
> scanner !
> 
> But when I try to print I get the following errors in /var/log/messages
> 
> ----- snip ------
> Jul  7 21:17:30 matze ptal-mlcd: SYSLOG at ExMgr.cpp:701, 
> dev=<mlc:usb:officejet_5500_series>, pid=21110, e=2         ptal-mlcd 
> successfully initialized. Jul  7 21:17:30 matze ptal-printd: 
> ptal-printd(mlc:usb:officejet_5500_series) successfully initialized 
> using /var/run/ptal-printd/mlc_usb_officejet_5500_series*.
> 
> Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=vmnet8 OUT= 
> MAC= SRC=192.168.212.1 DST=192.168.212.255 LEN=189 TOS=0x00 PREC=0x00 
> TTL=64 ID=3327 DF PROTO=UDP SPT=631 DPT=631 LEN=169
> 
> Jul  7 21:17:36 matze kernel: SuSE-FW-ILLEGAL-TARGET IN=eth1 OUT= MAC= 
> SRC=192.168.22.1 DST=192.168.22.255 LEN=188 TOS=0x00 PREC=0x00 TTL=64 
> ID=3328 DF PROTO=UDP SPT=631 DPT=631 LEN=168
> 
> Jul  7 21:17:36 matze kernel: SuSE-FW-DROP-ANTI-SPOOFING IN=eth0 OUT= 
> MAC= SRC=192.168.50.1 DST=192.168.50.255 LEN=181 TOS=0x00 PREC=0x00 
> TTL=64 ID=3329 DF PROTO=UDP SPT=631 DPT=631 LEN=161
> 
> Jul  7 21:17:37 matze ptal-mlcd: ERROR at ExMgr.cpp:2469, 
> dev=<mlc:usb:officejet_5500_series@/dev/usb/lp6>, pid=21110, e=19       
>    Couldn't find device: llioOpenOne failed!
> ----- snip -------
> 
> I have then  changed the line in the ptal configuration 
> /etc/ptal/mlc:usb:officejet_5500_series to be init.mlcd.append+=-device 
> /dev/usb/lp0
> 
> Now I don't get any messages anymore, but the ptal-connect -print 
> command still returns failed.
> 
> When I switch the printer off and on again my current terminal shows 
> the following messages:
> 
> ----- snip ---
> ptal-mlcd: ERROR at ExMgr.cpp:2744, 
> dev=<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=30270, e=19
> llioService: llioRead returns -1, expected=6!
> 
> ptal-mlcd: ERROR at ExMgr.cpp:902, 
> dev=<mlc:usb:officejet_5500_series@/dev/usb/lp0>, pid=30270, e=19
> exClose(reason=0x0010)
> ---- snip -----
> 
> It would be great if someone coult help me out here !
> 
> Thanks in advance
> 
> Matthias Schorer
> 
> Stiftsbogen 31, 81375 München, Germany
> Tel: +49 89 5796 7923
> Fax: + 49 89 5796 7925
> Mobile: +49 172 853 5093
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
> digital self defense, top technical experts, no vendor pitches, 
> unmatched networking opportunities. Visit www.blackhat.com
> 
> _______________________________________________
> hpoj-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/hpoj-devel


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com