Re: Problem with PSC 2410

I have already made first Mandrakelinux RPMs of HPLIP. You find them on

http://www.linuxprinting.org/till/tmp/

Version is 0.8.4. Note that there are three binary RPMs, one main 
package, one with HPIJS 2.0 and one with the PPDs for HPIJS 2.0. 
foomatic-rip is not included, it is already installed with the 
foomatic-filters package.

To try HPLIP, install at first only the main package. The toolbox should 
work then on 10.1. On Cooker it really does not work. Cory, are you 
already testing with Cooker?

Your PDF issues are probably a GhostScript problem. Try installing GPL 
GhostScript 8.15 from source. It should fix all PDF issues. To print 
PDFs then do not send them directly to CUPS (as CUPS uses XPDF to 
convert PDF to PostScript). Open the PDFs with gv and use the print 
function of gv to get them printed.

    Till

Cory Meisch wrote:
> There is a known issue with printing PDFs and having them off. It's not
> a driver issue but a postscript one if I remember correctly.
> 
> Sorry I can't be of more help.
> 
> Cory
> 
> On Thu, 2005-01-13 at 21:46 +0100, Gérard Delafond wrote:
> 
>>Hi, all HP users !
>>
>>I have some trouble with a HP PSC 2410.
>>
>>I use Mandrake 10.1 + KDE 3.3 + OOo 1.1.3 + CUPS.
>>
>>I used latest versions of HPOJ, then I tried HPLIP.
>>
>>When I try to print a page like this one in landscape mode, I always miss a 
>>few mm on the left side (using A4 format) :
>>http://www.gardemedicaledeparis.org/gardes/gardes.php?jour=2005-01-01
>>
>>When I want to print it in portrait mode, it is OK.
>>
>>When I use KDE's virtual PDF printer, it is OK. But if I want to print my PDF, 
>>it is bad again.
>>
>>The same problem occurs with OOo (but the print preview is OK).
>>
>>The Mandrake CUPS test page looks correct : there is a big frame next to the 
>>edges of the sheet, but le lower side of the frame is a bit far from the 
>>bottom edge (a few cm).
>>
>>I tried to lower the margins, but the only result is the text looks bigger. 
>>And still the same problem : the latest part of the text to get out of the 
>>printer is missing.
>>
>>Looks like the systems has a bad knowledge of the actual size of the sheets.
>>
>>Any idea about the reasons and the solution of the problem ?
>>
>>Other problem (not important for the moment) : the new graphical frontend to 
>>the printer crashes when launching, in spite of compiling nicely. The error 
>>message says there is a problem with QT.
>>
>>Many thanks
>>
>>Gerard


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt