Re: IPW2100 not able to associate using WPA

Zhu Yi <[email protected]> writes:

> Which version of ipw2100 driver and ieee80211 are you using? Can you try
> setting your AP to use TKIP (or CCMP) for both PTK and GTK?

Here are the driver versions:

root@titan:~# modinfo ipw2100
filename:       /lib/modules/2.6.15-27-386/kernel/drivers/net/wireless/ipw2100.ko
description:    Intel(R) PRO/Wireless 2100 Network Driver
version:        1.1.4
author:         Copyright(c) 2003-2005 Intel Corporation
license:        GPL
vermagic:       2.6.15-27-386 preempt 486 gcc-4.0

root@titan:~# modinfo ieee80211
filename:       /lib/modules/2.6.15-27-386/kernel/net/ieee80211/ieee80211.ko
version:        git-1.1.7
description:    802.11 data/management/control stack
author:         Copyright (C) 2004-2005 Intel Corporation <[email protected]>
license:        GPL
vermagic:       2.6.15-27-386 preempt 486 gcc-4.0
depends:        ieee80211_crypt
srcversion:     CE707989EA4826E0B3C6936

I set the AP to TKIP only:

Cell 02 - Address: 00:01:E3:0D:22:9A
     ESSID:"neutron"
     Protocol:IEEE 802.11b
     Mode:Master
     Channel:11
     Encryption key:on
     Bit Rates:11 Mb/s
     Extra: Rates (Mb/s): 1 2 5.5 11
     Quality:64  Signal level:0  Noise level:0
     IE: WPA Version 1
     Group Cipher : TKIP
     Pairwise Ciphers (1) : TKIP
     Authentication Suites (1) : PSK
     Extra: Last beacon: 816ms ago

(changed ESSID and password since last post)
But this makes no visible difference:

[output from wpa_supplicant]
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     6e 65 75 74 72 6f 6e                              neutron
Scan timeout - try to get results
Received 369 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 5
0: 00:01:e3:0d:22:9a ssid='neutron' wpa_ie_len=24 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:01:e3:0d:22:9a (SSID='neutron' freq=0 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK TKIP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_wext_set_drop_unencrypted
State: SCANNING -> ASSOCIATING
wpa_driver_wext_associate
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Wireless event: cmd=0x8b06 len=8
Wireless event: cmd=0x8b1a len=16
Wireless event: cmd=0x8b15 len=20
Wireless event: new AP: 00:00:00:00:00:00
Added BSSID 00:00:00:00:00:00 into blacklist
State: ASSOCIATING -> DISCONNECTED


-- 
Michael Bode


-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV