Re: Problem with ipw2200 and gentoo

This is gentoo specific issue, not ipw issue, please open an bug at
bugs.gentoo.org and discuss this there.
Specify emerge --info and complete description of the problem.

Best Regards,
Alon Bar-Lev.

On 5/18/07, François Valenduc <[email protected]> wrote:
> Alon Bar-Lev a écrit :
> > On 5/18/07, François Valenduc <[email protected]> wrote:
> >> Thanks for your answer but that doesn't help very much. I also used the
> >> ipw2200 and ieee80211 drivers provided in the kernel but the problem was
> >> the same.
> >
> > Well, since this is the stable version, please use this configuration.
> >
> >> The content my /etc/conf.d/net file is the following:
> >>     modules=( "wpa_supplicant" )
> >>     config_eth1=("dhcp")
> >
> > Same here.
> >
> >>     wpa_supplicant_eth1="-w -Dwext -c/etc/wpa_supplicant.conf"
> >>     associate_timeout_eth1=30
> >
> > I only use:
> > wpa_supplicant_eth1="-Dwext"
> >
> > here.
> > The configuration file defaults to
> > /etc/wpa_supplicant/wpa_supplicant.conf.
> >
> >> The content of /etc/wpa_supplicant.conf is the following:
> >>     ctrl_interface=/var/run/wpa_supplicant
> >>     ctrl_interface_group=0
> >>     ap_scan=2
> >
> > Please copy the example as defaults:
> > # bunzip2 -c /usr/share/doc/wpa_supplicant-0.5.7/wpa_supplicant.conf.bz2
> >> /etc/wpa_supplicant/wpa_supplicant.conf
> >
> > I use the following entry:
> > network={
> >        disabled=0
> >        ssid="..."
> >        scan_ssid=1
> >        proto=RSN
> >        key_mgmt=WPA-PSK
> >        pairwise=CCMP
> >        group=CCMP
> >        psk=...
> >        anonymous_identity="[email protected]"
> >        priority=2
> > }
> >
> > I too don't see any major difference... but if you try to sync up, it
> > may be simpler to determine what is going wrong at your place.
> >
> > Alon.
> >
> >
> The RSN protocol doesn't work for me. So I changed it to "WPA".
> What is quite strange is that association sometime occurs during the
> start of net.eth1 service but I still get the message "Failed to connect
> to wpa_supplicant - wpa_ctrl_open: No such file or directory ". What the
> hell is this missing directory or file it's talking about ?
>
> Thanks for your help.
> François
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> ipw2100-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ipw2100-devel
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
ipw2100-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel