Re: Problem with ipw2200 and gentoo

Alon Bar-Lev a écrit :
> This is gentoo specific issue, not ipw issue, please open an bug at
> bugs.gentoo.org and discuss this there.
> Specify emerge --info and complete description of the problem.
>
> Best Regards,
> Alon Bar-Lev.
>
> On 5/18/07, François Valenduc <[email protected]> wrote:
>> Alon Bar-Lev a écrit :
>> > On 5/18/07, François Valenduc <[email protected]> wrote:
>> >> Thanks for your answer but that doesn't help very much. I also
>> used the
>> >> ipw2200 and ieee80211 drivers provided in the kernel but the
>> problem was
>> >> the same.
>> >
>> > Well, since this is the stable version, please use this configuration.
>> >
>> >> The content my /etc/conf.d/net file is the following:
>> >>     modules=( "wpa_supplicant" )
>> >>     config_eth1=("dhcp")
>> >
>> > Same here.
>> >
>> >>     wpa_supplicant_eth1="-w -Dwext -c/etc/wpa_supplicant.conf"
>> >>     associate_timeout_eth1=30
>> >
>> > I only use:
>> > wpa_supplicant_eth1="-Dwext"
>> >
>> > here.
>> > The configuration file defaults to
>> > /etc/wpa_supplicant/wpa_supplicant.conf.
>> >
>> >> The content of /etc/wpa_supplicant.conf is the following:
>> >>     ctrl_interface=/var/run/wpa_supplicant
>> >>     ctrl_interface_group=0
>> >>     ap_scan=2
>> >
>> > Please copy the example as defaults:
>> > # bunzip2 -c
>> /usr/share/doc/wpa_supplicant-0.5.7/wpa_supplicant.conf.bz2
>> >> /etc/wpa_supplicant/wpa_supplicant.conf
>> >
>> > I use the following entry:
>> > network={
>> >        disabled=0
>> >        ssid="..."
>> >        scan_ssid=1
>> >        proto=RSN
>> >        key_mgmt=WPA-PSK
>> >        pairwise=CCMP
>> >        group=CCMP
>> >        psk=...
>> >        anonymous_identity="[email protected]"
>> >        priority=2
>> > }
>> >
>> > I too don't see any major difference... but if you try to sync up, it
>> > may be simpler to determine what is going wrong at your place.
>> >
>> > Alon.
>> >
>> >
>> The RSN protocol doesn't work for me. So I changed it to "WPA".
>> What is quite strange is that association sometime occurs during the
>> start of net.eth1 service but I still get the message "Failed to connect
>> to wpa_supplicant - wpa_ctrl_open: No such file or directory ". What the
>> hell is this missing directory or file it's talking about ?
>>
>> Thanks for your help.
>> François
>>
>> -------------------------------------------------------------------------
>>
>> This SF.net email is sponsored by DB2 Express
>> Download DB2 Express C - the FREE version of DB2 express and take
>> control of your XML. No limits. Just data. Click to get it now.
>> http://sourceforge.net/powerbar/db2/
>> _______________________________________________
>> ipw2100-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/ipw2100-devel
>>
>
>
Thanks for your help. I have just created a bug report (#179043) at the
gentoo bugzilla.
François Valenduc

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
ipw2100-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/ipw2100-devel