wifi0: ath_chan_set: Unable to reset channel 6 (2437 MHz) flags 0xc0 'Hardware didn't respond as expected' (HAL status 3)

Hi,
Details of my platform
Core                 :DM6467t-Davinci -  ARM9
Linux                : 2.6.32 / 2.6.18
Atheros            : AR5414
Toolchain          : arm_v5t_le-gcc (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)
Madwifi             : madwifi-hal-testing-r4126-20100324
                          madwifi-hal-0.10.5.6-current.tar.gz
Pls find the logs below....
What could be the problem?

[email protected]:~# cd /home/raghu/HAL/wifi/wifi_modules/
[email protected]:/home/raghu/HAL/wifi/wifi_modules# ./install.sh
ath_hal: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425,
RF2417, REGOPS_FUNC)
wlan: mac acl policy registered
in function __pci_register_driver
PCI: enabling device 0000:00:06.0 (0340 -> 0342)
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5414 chip found (MAC 10.5, PHY SChip 6.1, Radio 6.3)
ath_pci: wifi0: Atheros 5413: mem=0x30080000, irq=49
in function __pci_register_driver after driver reg
in function __pci_register_driver after pci_create_newid_file
in function __pci_register_driver after pci_create_removeid_file
[email protected]:/home/raghu/HAL/wifi/wifi_modules#
[email protected]:/home/raghu/HAL/wifi/wifi_modules# iwconfig
iwconfig: Symbol `iw_operation_mode' has different size in shared objectnet eth0
: DaVinci EMAC: ioctl not supported
, consider re-linking
lo        no wireless extensions.
eth0      no wireless extensions.
wifi0     no wireless extensions.
wlan0     IEEE 802.11b  ESSID:""  Nickname:""
          Mode:Managed  Channel:0  Access Point: Not-Associated
          Bit Rate:0 kb/s   Tx-Power:0 dBm   Sensitivity=1/1
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality=0/70  Signal level=0 dBm  Noise level=0 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

[email protected]:/home/raghu/HAL/wifi/wifi_modules# ifconfig wlan0 up
[email protected]:/home/raghu/HAL/wifi/wifi_modules# cd ..
[email protected]:/home/raghu/HAL/wifi# cd wifi_apps/
[email protected]:/home/raghu/HAL/wifi/wifi_apps# ./wlanconfig wlan0 list scann
[email protected]:/home/raghu/HAL/wifi/wifi_apps# wifi0: ath_chan_set: Unable to
 reset channel 6 (2437 MHz) flags 0xc0 'Hardware didn't respond as expected' (HA
L status 3)
./wlanconfig wlan0 list scannwifi0: ath_chan_set: Unable to reset channel 7 (244
2 MHz) flags 0xc0 'Hardware didn't respond as expected' (HAL status 3)
wifi0: ath_chan_set: Unable to reset channel 56 (5280 MHz) flags 0x140 'Hardware
 didn't respond as expected' (HAL status 3)
wifi0: ath_chan_set: Unable to reset channel 64 (5320 MHz) flags 0x140 'Hardware
 didn't respond as expected' (HAL status 3)

Thanks & Regards,
Raghu Ramaraj


________________________________
http://www.mindtree.com/email/disclaimer.html

------------------------------------------------------------------------------

_______________________________________________
Madwifi-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/madwifi-users