Re: Caller ID not supported?

Hi,

before you attempt to use the caller ID feature, please make sure that 
you are able to make a dial up connection to see if the modem driver is 
correctly working.

Like the other users, please send at [email protected] a 'dumpdiag' 
that you can generate with the 'hcfpciconfig --dumpdiag' command in a 
root shell. You should also send us the commands you have sent to the modem.

We do not always reply to users on the mailing lists but we reply in 
private to users.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]


Rick Matthews wrote:
> My weekend project was to bring up a network caller id sever using a
> 127a:1003 PCI modem from the spare parts bin and the hcfpcimodem
> software (1.01lnxt04072900full_k2.4.20_28.8-1rh.i586 to be exact).
> 
> Current status: The modem gives the proper responses during 
> initialization but reports only the RINGs with no cid information.
> 
> I went back through the archives and found:
> 	_Seven people have inquired about caller id.
> 	_Only two of the seven received responses.
> 	_Both were asked to run "hcfpciconfig --dumpdiag".
> 	_Both complied and submitted their dumpdiag data.
> 	_Neither received any additional assistance.
> 	_One of the two then paid for the full version and re-asked 
> 	 his cid question, but received no response.
> 
> Shouldn't caller id be added to the limitations page?
> 
> Rick
> _______________________________________________
> %(real_name)s mailing list
> %(real_name)s@%(host_name)s
> %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
_______________________________________________
%(real_name)s mailing list
%(real_name)s@%(host_name)s
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s