Re: Failing to negotiate a connection
"Linuxant support (Jonathan)" <[email protected]>
| Newsgroups | gmane.linux.drivers.modem.hsf |
|---|---|
| Organization | Linuxant Inc. |
| Message-ID | <[email protected]> |
Hi, at what point exactly the connection fails? Does the remove machine detect ringing and try to receive the call? If this is the case, it is possible that this is a modulation related issue. You could try to use each of the following init. strings on the machine which is dialing until one of them fix the problem. --- AT &F W1 +ER=1; +DR=1; +MS=V90,0 AT &F W1 +ER=1; +DR=1; +MS=V90,1 AT &F W1 +ER=1; +DR=1; +MS=V34,0 AT &F W1 +ER=1; +DR=1; +MS=V34,1 AT &F W1 +ER=1; +DR=1; +MS=V32B,0 AT &F W1 +ER=1; +DR=1; +MS=V32B,1 AT &F W1 +ER=1; +DR=1; +MS=V32,0 AT &F W1 +ER=1; +DR=1; +MS=V32,1 --- If the remote modem is unable to detect the ring, please try with Windows on the same machine to see if it is able to detect the ring or not. Please report the result of this test to [email protected]. Regards, Jonathan Technical specialist / Linuxant www.linuxant.com [email protected] Dave West wrote: > I have a problem with two Conexant modems communicating together. > > Modem 1 is in my Linux box here and modem 2 is installed in an identical > machine on a remote site. > > Both systems are SuSE Linux 9.1 with all current updates applied. > > I have downloaded and installed the most recent drivers according to the auto > install script. > > The box here can dial the internet and connect successfully and operates fine. > > The box on the remote site can do likewise and wvdial reports a connection > speed of 57600 from the modem. The connection is stable and fast. > > When I attempt to connect to the remote site from this box by direct dial up > the two modems never manage to negotiate a connection at all. > > When I try to connect to the remote site using a Windoze laptop (Toshiba) with > built in modem I can establish a connection but it is unreliable and very > slow. > > I have consulted with the Telecoms providers and they assure me there is no > problem with the lines (do I believe them ????). > > Is there an init string for either end that will help me? > > Thanks, > Dave West. > > _______________________________________________ > hsflinux mailing list > [email protected] > https://www.linuxant.com/mailman/listinfo/hsflinux