Re: "No carrier" error.

Hi,

when you tried on the old PC, did you were using the exact same modem 
you are trying to use right now?

Could you send to [email protected] the output of 'dumpdiag' please? 
Type the following in a root shell:

---
hsfconfig --dumpdiag
---

Just send us the generated file located in /tmp ('hsfdiag.txt').
It'll help us solve the problem.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Francois Beerten wrote:
> Linuxant support (Jonathan) wrote:
> 
>> Please make sure that the right country is selected with the 
>> 'hsfconfig --country' command in a root shell. You could try with 
>> different countries as well, one of them might solve the problem.
> 
> 
> 
> We checked that. It's was set to Belgium where we live. When it worked 
> on the older machine it was set to Belgium too. We also tried with many 
> other countries without any positive result.
> 
>>
>> Please also try with the 'AT &F X1' init. string to see if there is a 
>> difference.
> 
> 
> 
> We tried it too without success. It was one of the few things, we found 
> on the mailing lists.
> 
>>
>> If you require more assistance, please tell us what was the version of 
>> the HSF modem driver which was working fine on SuSE 8.0.
> 
> 
> 
> 
> It was on Mandrake 8.0 instead of Suse 8.0. We used the hsf driver 
> available on your website for mandrake 8 with the default kernel.
> 
> 
> We are trying with the current version hsfmodem-7.18.00.07. We got the 
> driver to work on the old PC with hsfmodem-7.18.00.05. Unfortunatly, we 
> dont have the old PC anymore.
> 
>>
>> Since you have moved the modem to a new machine, you could try under 
>> Windows XP on the new machine just to make sure that it works well.
> 
> 
> 
> The modem works under Windows on the new machine.
> 
> Thanks for your help,
> 
> Francois Beerten.
> 
> 
>> Francois Beerten wrote:
>>
>>> Hi,
>>>
>>> We are trying to get a Conexant HSF based modem to work under Linux. 
>>> The linuxant driver exposes a device and kppp manages to connect to 
>>> it. But dailing a number does not work. We hear the dail tone but 
>>> nothing else. After a long period the modem aborts and reports "No 
>>> carrier".
>>>
>>> The modem is a "Conexant Puresoft V90 PCI". The system has Mandrake 
>>> 10.1 community with the default kernel. The hfsdiag.txt is attached 
>>> to this email. We tried most tips we found in the FAQ or on the 
>>> mailing list.
>>>
>>> The modem works well in Windows on the same PC. The modem worked with 
>>> linuxant on an old PC and Mandrake 8.0.
>>>
>>>
>>> Thanks for your help,
>>>
>>> Francois Beerten.
>>>
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux