Re: kernel.modprobe error

Hi,

The error message:

---
error: "kernel.modprobe" is an unknown key
---

seems to be problematic but there is another problem as well. We can see 
the following fatal errors in your 'dmesg':

---
hsfosspec: Unknown symbol errno
hsfosspec: Unknown symbol devfs_mk_cdev
hsfosspec: Unknown symbol devfs_remove
---

We are not aware of these problems. Can you try with other versions of 
the Linux kernel to see if there is a difference?

It is important to note that the version of the HSF modem driver you are 
using (7.18.00.07) is known to crash on x86_64 kernels version 2.6.11 or 
later. This known issue will be fixed in the next release of the driver 
which should be out very soon.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Andrea Chiavelli wrote:
> Please help... I'm in trouble installing linuxant driver the 
> laptop-internal modem labeled "SoftV90 Data Fax Modem with smart CP" 
> (chipset foxcom-conexant (?)).
> Here are the steps I've made until now:
> 1- Run scanModem and argue (but urge a confirmation) the conexant 
> chipset's presence:
> 
> UPDATE=2005_Dec_26
> ONLY use scanModem downloaded as: 
> http://linmodems.technion.ac.il/packages/scanModem.gz
> 
> ./scanModem should ONLY be run within a Linux/UNIX partition.
> If within a MicroSoft/DOS partition, abort with Ctrl-C now !!!
> Copy scanModem.gz to your Linux partition and restart.
> 
> grep: /etc/apt/sources.list: No such file or directory
> PCIBUS=0000:00:14.6
> 
> Providing detail for device at  0000:00:14.6
>  with vendor-ID:device-ID
>            ----:----
> Class 0703: 1002:4378   Modem: ATI Technologies Inc: Unknown device 4378 
> (rev 02) (prog-if 00 [Generic])
>  SubSystem 1025:0080  Acer Incorporated [ALI]: Unknown device 0080
>        Flags: 66Mhz, slow devsel, IRQ 11
> 
>                  -----PCI_IDs-------                    --CompilerVer-
>    Feature List:  Primary  Subsystem Distr  KernelVer   kernel default  CPU
> ./scanModem test 1002:4378 1025:0080 gentoo 2.6.12-gentoo-r10  3.4.3 
> 3.4.3    x86_64
>              From records, 1025:0080 has soft modem codec type CXT
> The hsfmodem drivers from http://www.linuxant.com/drivers are the ONLY 
> support of ConeXanT codec modems under Linux!!
> 
> 
> 2- Run hsfconfig without success:
> 
> Conexant HSF softmodem driver, version 7.18.00.07x86_64full
> 
> If you need license keys, assistance or more information, please go to:
>        http://www.linuxant.com/
> 
> When reporting a problem for the first time, please send
> us the file generated by "hsfconfig --dumpdiag".
> 
> Warning: existing driver modules found under:
>        /lib/modules/2.6.12-gentoo-r10/
> Would you like to keep using them? [no]
> 
> No pre-built modules for: unknown-unknown linux-2.6.12-gentoo-r10 
> x86_64-SMP
> 
> Trying to automatically build the driver modules...
> (this requires a C compiler and proper kernel sources to be installed)
> 
> Where is the linux source build directory that matches your running kernel?
> [/lib/modules/2.6.12-gentoo-r10/build]
> 
> Building modules for kernel 2.6.12-gentoo-r10, using source directory
> /lib/modules/2.6.12-gentoo-r10/build. Please wait...
> done.
> error: "kernel.modprobe" is an unknown key
> 
> ERROR: hsf driver not active
> 
> 
> 
> 3- Copy the output of --dumpdiag (at the end of this message). I pray 
> you to post any helpful idea, i really need that modem!
> 
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux