Re: Problem after upgrading udev and kernel

Hi,

after a disconnect and before you reconnect, please generate and then 
post the output of the following command in a root shell:

---
cat /proc/driver/h*/0/lastcallstatus
---

You could also try with a vanilla kernel with no patches applied to see 
if there is a difference. You must also make sure that your kernel was 
not compiled with the CONFIG_4KSTACKS option enabled.

Finally, if the problem is related to the modulation used, it is quite 
possible that simply installing a valid license will solve this issue.

Regards,


Jonathan
Technical specialist / Linuxant
www.linuxant.com
[email protected]



Denis Martinez wrote:
> I have upgraded to kernel 2.6.15.4  (archlinux build) and after being 
> connected for like 30-60 mins, my PC suddenly becomes very slow and the 
> connection drops : (i'm using linuxant hsf 7.43.00.01)
> 
> This is what I get in my /var/log/messages.log
> 
> Feb 12 12:22:56 darkstar pppd[3394]: No response to 4 echo-requests
> Feb 12 12:22:56 darkstar pppd[3394]: Serial link appears to be 
> disconnected.
> Feb 12 12:22:56 darkstar pppd[3394]: Connect time 61.6 minutes.
> Feb 12 12:22:56 darkstar pppd[3394]: Sent 632818 bytes, received 5086832 
> bytes.
> Feb 12 12:23:02 darkstar pppd[3394]: Connection terminated.
> Feb 12 12:23:06 darkstar pppd[3394]: Modem hangup
> Feb 12 12:23:06 darkstar pppd[3394]: Exit.
> 
> 
> Note my kernel is compiled with:
> PKGBUILD                             emu10k-suspend.patch        
> logo_linux_clut224.ppm              sata-suspend.patch
> acpi-dsdt-initrd-v0.7d-2.6.12.patch  ipw2200-monitor.patch       
> ndevfs.patch                        uevent-2.6.15.patch.bz2
> acpi-fixup.patch                     kallsyms-compression.patch  
> powernow-k7.patch                   usb-input-fix.patch
> config                               kernel26.install            
> sata-enable-atapi-by-default.patch  vt8231-new-driver.patch
> 
> I tried the options noapic, pci=noacpi, but nothing changed.
> I'm using the free version of HSF.
> 
> Thanks in advance for your answers
> 
> Denis
> 
> _______________________________________________
> hsflinux mailing list
> [email protected]
> https://www.linuxant.com/mailman/listinfo/hsflinux