What parameters files are missing in what directories in HSF mo dem in Linux platform

I saw this with bunch of zero values in the parameter fields...
Does anyone know which directories files are required to cause the modem
driver
fill configure below "lastcallstatus" field properly ?


$
$ ls -ltr
-r--r--r--    1 root     root            0 Feb  1 14:26 lastcallstatus
-r--r--r--    1 root     root            0 Feb  1 14:26 hwrevision
-r--r--r--    1 root     root            0 Feb  1 14:26 hwprofile
-r--r--r--    1 root     root            0 Feb  1 14:26 hwinst
$ cat lastcallstatus
<#UG VERSION=3>
<DRIVER VERSION=hsfmodem-7.47.00.03oem>
<CALL SETUP RESULT=Detected Data Answer Tone>
<MULTIMEDIA MODE=Data Only>
<DTE-DCE MODE=Async data>
<V.8 CM="">
<V.8 JM="">
<RX SIG PWR DB=0, TX SIG PWR DB=0, S/N RATIO DB=0>
<RTD=0>
<TX MOD=Unknown, TX SYMBOL RATE=0, TX CARRIER FREQ=0>
<RX MOD=Unknown, RX SYMBOL RATE=0, RX CARRIER FREQ=0>
<TX FIRST RATE=0, RX FIRST RATE=0>
<CARRIER LOSS=0, RATE RENEG=0>
<RETRAINS REQ=0, RETRAINS DET=0>
<TX FINAL RATE=0, RX FINAL RATE=0>
<PROTOCOL=None>
<EC FRAME SIZE=0>
<EC LINK TIMEOUTS=0>
<EC LINK NAKS=0>
<COMPRESSION=None>
<COMPRESSION DICTIONARY SIZE=0>
<TX FLOW CONTROL=0>
<RX FLOW CONTROL=0>
<TX CHARS SENT FROM DTE=0>
<RX CHARS SENT TO DTE=F>
<TX CHARS LOST=0>
<RX CHARS LOST=0>
<TX FRAME COUNT=0>
<RX FRAME COUNT=0>
<TX FRAME ERROR COUNT=0>
<RX FRAME ERROR COUNT=0>
<TERMINATION CAUSE=Training failed> ==================?????????????????
<CALL WAITING EVENT COUNT=0>
<LSD Vdd=0, Power Bits=0>
<V8BIS DSP VER=0>
<RATE RENEG REQ=0, RATE RENEG DET=0>
<RBS=0, AltRBS=0>
<DIG PAD DET=0, DIG LOSS EST=0, IMD RATIO=0, SPEED DROP=0>
<HS CNT=0, Det1=0, Res1=0, LAPM=0>
<EQM=0, TRAINING EQM=0>
<HandShake Time=0.0>

<DIB ERROR COUNTERS=0, 0, 0, 0, 0, 0, 0, 0>
$