Re: slackware 9.1 + kernel 2.6.5 doesn't work

Hi
i've tried with a 2.6.4 kernel + latest-cvs-prism54
but it still doesn't work;  the module load cleanly and iwconfig had detected 
my card correctly, i think that i've forgot sys filesystem, as luis had told 
in his mail.

Thanks for your answer.

Nando
 
Alle 06:56, giovedì 15 aprile 2004, erojem_prism ha scritto:
> Hi !
>
> I use the same config as you (slack 9.1 + 2.6.5) and
> everything works great with my peabird pcmcia card...
>
> Does the module prism54 load cleanly with a line in the syslog ?
> Before doing ifconfig eth1 up, check with iwconfig that your
> card is detected.
>
> Cheers.
> Jérôme
>
> > hi
> > i've compiled a new 2.6.5 kernel on my slackware 9.1 with a
>
> smc2802 pci card
>
> > but  it doesn't work!! :(
> > i've tried more configuration but i had obtained nothing good.
> > The firmware.agent and isl3890 are in the right position
>
> (i've a 2.4.25 prism
>
> > patched kernel too, and it works great) but when i do
>
> ifconfig eth1 up this
>
> > is the output:
> > # ifconfig eth1 up
> > SIOCSIFFLAGS: No such file or directory
> >
> > and this from #cat /var/log/syslog :
> > Apr 14 14:44:28 dezaktop kernel: prism54: request_firmware()
>
> failed for
>
> > 'isl3890'
> > Apr 14 14:44:28 dezaktop kernel: eth1: could not upload
>
> firmware ('isl3890')
>
> > Do You Have any ideas?
> >
> > Thanks in advance
> > Nando
> >
> > P.S.: i've attached my 2.6.5 .config file
> > P.P.S.:I'm sorry for my very bad english :)
>
> Accédez au courrier électronique de La Poste : www.laposte.net ;
> 3615 LAPOSTENET (0,34€/mn) ; tél : 08 92 68 13 50 (0,34€/mn)
>
>
>
> _______________________________________________
> Prism54-users mailing list
> [email protected]
> http://prism54.org/mailman/listinfo/prism54-users