smc2835w problem : mgmt tx queue is still full

hello i have bought a smc2835w

sorry for my english

that one week ago was working but suddenly one day it stop working inclusive in windows

that is the problem:

i insert the card and i got :

Apr 21 16:25:26 turruncun kernel: PCI: Enabling device 0000:03:00.0 (0000 -> 0002)

Apr 21 16:25:26 turruncun kernel: eth1: prism54 driver detected card model: SMC2835W

root@turruncun:~# iwconfig

lo no wireless extensions.

eth0 no wireless extensions.

eth1 NOT READY! ESSID:off/any

Mode:Managed Channel:6 Access Point: 00:00:00:00:00:00

Tx-Power=31 dBm Sensitivity=0/200

Retry min limit:0 RTS thr=0 B Fragment thr=0 B

Encryption key:off

Link Quality:0 Signal level:0 Noise level:0

Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0

Tx excessive retries:0 Invalid misc:0 Missed beacon:0

root@turruncun:~# ifconfig eth1

eth1 Link encap:Ethernet HWaddr 00:30:B4:00:00:00

BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Interrupt:11

!!!! but the MAC is 0004e2-649209!!!!

when i make a ifconfig eth1 up it takes some time and in the /var/log/syslog :

Apr 21 16:35:29 turruncun kernel: eth1: islpci_open()

Apr 21 16:35:29 turruncun kernel: eth1: resetting device...

Apr 21 16:35:29 turruncun kernel: eth1: uploading firmware...

Apr 21 16:35:29 turruncun kernel: eth1: firmware uploaded done, now triggering reset...

Apr 21 16:35:30 turruncun kernel: eth1: device soft reset timed out

Apr 21 16:35:30 turruncun kernel: eth1: timeout waiting for mgmt response 1000, trigging device

Apr 21 16:35:31 turruncun kernel: eth1: timeout waiting for mgmt response

Apr 21 16:35:31 turruncun kernel: eth1: timeout waiting for mgmt response 1000, trigging device

Apr 21 16:35:32 turruncun kernel: eth1: timeout waiting for mgmt response

Apr 21 16:35:32 turruncun kernel: eth1: timeout waiting for mgmt response 1000, trigging device

Apr 21 16:35:34 turruncun kernel: eth1: timeout waiting for mgmt response

Apr 21 16:35:34 turruncun kernel: eth1: timeout waiting for mgmt response 1000, trigging device

Apr 21 16:35:35 turruncun kernel: eth1: timeout waiting for mgmt response

Apr 21 16:35:35 turruncun kernel: eth1: mgmt tx queue is still full

Apr 21 16:35:35 turruncun last message repeated 14 times

Apr 21 16:35:35 turruncun kernel: eth1: mgt_commit has failed. Restart the device

Apr 21 16:35:35 turruncun kernel: eth1: mgmt tx queue is still full

and now i make ifconfig eth1 and iwconfig and i get :

root@turruncun:~# ifconfig eth1

eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

Interrupt:11

root@turruncun:~# iwconfig

lo no wireless extensions.

eth0 no wireless extensions.

eth1 no wireless extensions.

I have try with kernel 2.6.3 + trackball

kernel 2.6.5 (with driver that it has )

firmwares : 1.0.1.0.arm , 1.0.3.0.arm , 1.0.4.3.arm

I have the firmware hotplug and the sysfs mounted and all that says in trackball README.

i don't know what more information should i have put in this e-mail but i you need more just e-mail me : [email protected] or put a message in this foro.

i have read that people whith the smc2802 has the same problem.

thanks.

----------
¿Vas a comprar algo a través de Internet? Ordénalo por el mejor precio en MSN Compras.