Re: Transmit timeout problems
| Newsgroups | gmane.linux.drivers.realtek.devel |
|---|---|
| Message-ID | <[email protected]> |
Thanks a lot! The noapci flag worked around the problem. Now I get to have fun doing pirq= permutations. Brian On Fri, Aug 23, 2002 at 10:37:51PM -0400, Donald Becker wrote: > On Fri, 23 Aug 2002 [email protected] wrote: > > > I'm having a problem with my realtek 8139C. I can't get it working under > > 2.4 series kernels. It works fine in 2.2.20 with rtl8139. > > > # insmod rtl8139.o debug=31 > > rtl8139.c:v1.20 6/21/2002 Donald Becker, [email protected]. > > http://www.scyld.com/network/rtl8139.html > > eth0: RealTek RTL8139C Fast Ethernet at 0xe400, IRQ 18, 00:30:1b:10:07:32. > ... > > eth0: Transmit timeout, status 0c 0005 media 18. > > eth0: RTL8139 Interrupt line blocked, status 5. > > Interrupt problem. > > > # ./rtl8139-diag -aa -f > > rtl8139-diag.c:v2.09 8/6/2002 Donald Becker ([email protected]) > ... > > Interrupt sources are pending. > > Rx Complete indication. > > Rx Buffer Overflow indication. > > Rx FIFO Overflow indication. > > Yup, your interrupt line isn't working. See the kernel boot message for > information on working around this problem. Perhaps "noapic" as a > kernel option at boot... > > -- > Donald Becker [email protected] > Scyld Computing Corporation http://www.scyld.com > 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters > Annapolis MD 21403 410-990-9993 > > _______________________________________________ > realtek mailing list > [email protected] > http://www.scyld.com/mailman/listinfo/realtek