Re: problem installing driver rtl8139
patrick thempel <[email protected]> Mon, 9 Dec 2002 05:55:32 -0800 (PST)
| Newsgroups | gmane.linux.drivers.realtek.devel |
|---|---|
| Message-ID | <[email protected]> |
try insmod rtl8139 (without o ) ? --- Panard <[email protected]> wrote: > Hi ! > > I've a big problem. > I've a kernel 2.4.19, and when I make 'insmod > rtl8139.o', I've the error : > no surch device > > But, when I make ./rtl8139-diag -aem, I've the > ouput : > rtl8139-diag.c:v2.10 9/18/2002 Donald Becker > ([email protected]) > http://www.scyld.com/diag/index.html > Index #1: Found a RealTek RTL8139 adapter at 0xd000. > RealTek chip registers at 0xd000 > 0x000: 96fc5000 00009033 b9f38105 0a00b18d 00002000 > 00002000 00002000 > 00002000 > 0x020: 00001000 00300028 20004000 00000400 81100000 > 01000000 0000fff0 > 00000000 > 0x040: 74400000 00000000 fc161dc7 00000000 004d1000 > 00000000 0088e51c > 0010042c > 0x060: 1000000f 01e17809 00000000 00000000 00000704 > 000003c0 60f60c59 > 7b732660. > Realtek station address 00:50:fc:96:33:90, chip type > 'rtl8139C'. > Receiver configuration: Reception disabled > Rx FIFO threshold 16 bytes, maximum burst 16 > bytes, 8KB ring > Transmitter disabled with normal settings, maximum > burst 16 bytes. > Tx entry #0 status 00002000 incomplete, 0 bytes. > Tx entry #1 status 00002000 incomplete, 0 bytes. > Tx entry #2 status 00002000 incomplete, 0 bytes. > Tx entry #3 status 00002000 incomplete, 0 bytes. > Flow control: Tx disabled Rx disabled. > The chip configuration is 0x10 0x4d, MII > full-duplex mode. > No interrupt sources are pending. > Decoded EEPROM contents: > PCI IDs -- Vendor 0x10ec, Device 0x8139. > PCI Subsystem IDs -- Vendor 0x10ec, Device > 0x8139. > PCI timer settings -- minimum grant 32, maximum > latency 64. > General purpose pins -- direction 0xe5 value > 0x12. > Station Address 00:50:FC:96:33:90. > Configuration register 0/1 -- 0x4d / 0xc2. > EEPROM active region checksum is 0a28. > The RTL8139 does not use a MII transceiver. > It does have internal MII-compatible registers: > Basic mode control register 0x1000. > Basic mode status register 0x7809. > Autonegotiation Advertisement 0x01e1. > Link Partner Ability register 0x0000. > Autonegotiation expansion 0x0000. > Disconnects 0x0000. > False carrier sense counter 0x0000. > NWay test register 0x0704. > Receive frame error count 0x0000. > > Help ! > > Thanks > > -- > ________________________________________________________ > [email protected] > http://www.inzenet.org > _______________________________________________ > realtek mailing list > [email protected] > http://www.scyld.com/mailman/listinfo/realtek ===== Mit freundlichen Gruessen Patrick Thempel mail:[email protected] __________________________________________________ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com