Re: insmod problem
Nick Ellson <[email protected]> Tue, 19 Oct 2004 06:54:52 -0700 (PDT)
| Newsgroups | gmane.linux.drivers.realtek.devel |
|---|---|
| Message-ID | <[email protected]> |
Naresh, I am having the same issue with Gentoo Linux on 2.6.x kernels. If you find a response to your query, let me know. I have written a few boards, no answers yet. Nick -- Nick Ellson CCDA, CCNP, CCSP, CCAI, MCSE 2000, Security+, Network+ Network Hobbyist. On Sun, 17 Oct 2004, Naresh Deshaveni wrote: > Hi, > > I have been trying to get my RealTek 8139 card work in Redhat linux 8.0. > but without success. > My linux kernel version is 2.4.18-14 > > I had 8139too.o in the /lib/modules/2.4.18-14/kernel/drivers/net/ > directory. > When I did insmod 8139too I got the following message. > ----------------------------------------------------------------------------------------------------------------------------------------- > /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol > mii_ethtool_gset_Raeb9c2b4 > /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol > mii_nway_restart_R9d437993 > /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol > mii_link_ok_R633bd7b9 > /lib/modules/2.4.18-14/kernel/drivers/net/8139too.o: unresolved symbol > mii_ethtool_sset_Rc366593c > ---------------------------------------------------------------------------------------------------------------------------------------- > > > The Dmesg gave me the following > ---------------------------------------------------------------------------------------------------------------------------------------- > dmesg > Linux version 2.4.18-14 ([email protected]) (gcc version > 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Wed Sep 4 13:35:50 EDT 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000007f00000 (usable) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 127MB LOWMEM available. > On node 0 totalpages: 32512 > zone(0): 4096 pages. > zone(1): 28416 pages. > zone(2): 0 pages. > Kernel command line: auto BOOT_IMAGE=linux ro root=303 > BOOT_FILE=/boot/vmlinuz-2.4.18-14 > Initializing CPU#0 > Detected 801.849 MHz processor. > Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized > Console: colour VGA+ 80x25 > Calibrating delay loop... 1594.42 BogoMIPS > Memory: 123816k/130048k available (1326k kernel code, 4832k reserved, 999k > data, 212k init, 0k highmem) > Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) > Inode cache hash table entries: 8192 (order: 4, 65536 bytes) > Mount cache hash table entries: 2048 (order: 2, 16384 bytes) > ramfs: mounted with options: <defaults> > ramfs: max_pages=15604 max_file_pages=0 max_inodes=0 max_dentries=15604 > Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) > Page-cache hash table entries: 32768 (order: 5, 131072 bytes) > CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 > CPU: Common caps: 0383f9ff 00000000 00000000 00000000 > CPU: Intel Pentium III (Coppermine) stepping 0a > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([email protected]) > mtrr: detected mtrr type: Intel > PCI: PCI BIOS revision 2.10 entry at 0xfb280, last bus=1 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 2: assuming transparent > PCI: Using IRQ router PIIX [8086/2410] at 00:1f.0 > PCI: Found IRQ 5 for device 00:1f.3 > PCI: Sharing IRQ 5 with 00:1f.5 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) > Starting kswapd > VFS: Diskquotas version dquot_6.5.0 initialized > Detected PS/2 Mouse Port. > pty: 2048 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ > SERIAL_PCI ISAPNP enabled > ttyS0 at 0x03f8 (irq = 4) is a 16550A > ttyS1 at 0x02f8 (irq = 3) is a 16550A > Real Time Clock Driver v1.10e > oprofile: mapping APIC. > oprofile: enabled local APIC. Err code 00000000 > oprofile 0.2 loaded, major 254 > block: 240 slots per queue, batch=60 > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller on PCI bus 00 dev f9 > PIIX4: chipset revision 2 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio > hda: ST340823A, ATA DISK drive > hdc: SAMSUNG CD-ROM SC-152C, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff) > blk: queue c03c0004, I/O limit 4095Mb (mask 0xffffffff) > hda: 78165360 sectors (40021 MB) w/512KiB Cache, CHS=4865/255/63, UDMA(66) > ide-floppy driver 0.99.newide > Partition check: > hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > hda14 > > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > NET4: Frame Diverter 0.46 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > ide-floppy driver 0.99.newide > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 8192 bind 16384) > Linux IP multicast router 0.06 plus PIM-SM > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 126k freed > VFS: Mounted root (ext2 filesystem). > Journalled Block Device driver loaded > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > Freeing unused kernel memory: 212k freed > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 13:44:31 Sep 4 2002 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 9 for device 00:1f.2 > PCI: Setting latency timer of device 00:1f.2 to 64 > usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usb.c: registered new driver hiddev > usb.c: registered new driver hid > hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]> > hid-core.c: USB HID support drivers > mice: PS/2 mouse device common for all mice > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal > Adding Swap: 265032k swap-space (priority -1) > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,5), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,6), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,9), internal journal > EXT3-fs: mounted filesystem with ordered data mode. > parport0: PC-style at 0x378 [PCSPP,TRISTATE] > ohci1394: pci_module_init failed > ip_tables: (C) 2000-2002 Netfilter core team > 8139too Fast Ethernet driver 0.9.25 > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 94M > agpgart: Detected an Intel i810 E Chipset. > agpgart: AGP aperture is 64M @ 0xe0000000 > memory : c441a2e0 > memory : 00000000 > memory : c441a320 > 8139too Fast Ethernet driver 0.9.25 > --------------------------------------------------------------------------------------------------------------------------------------- > > > > > /sbin/lspci -v > --------------------------------------------------------------------------------------------------------------------------------------- > 00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory > Controller Hub] (rev 03) > Subsystem: Intel Corp. 82810E DC-133 GMCH [Graphics Memory > Controller Hub] > Flags: bus master, fast devsel, latency 0 > > 00:01.0 VGA compatible controller: Intel Corp. 82810E DC-133 CGC [Chipset > Graphics Controller] (rev 03) (prog-if 00 [VGA]) > Subsystem: Intel Corp. 82810E DC-133 CGC [Chipset Graphics > Controller] > Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 12 > Memory at e0000000 (32-bit, prefetchable) [size=64M] > Memory at e6000000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [dc] Power Management version 1 > > 00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 > [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: e4000000-e5ffffff > > 00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) > Flags: bus master, medium devsel, latency 0 > > 00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 > [Master]) > Subsystem: Intel Corp. 82801AA IDE > Flags: bus master, medium devsel, latency 0 > [virtual] I/O ports at 01f0 > [virtual] I/O ports at 03f4 > [virtual] I/O ports at 0170 > [virtual] I/O ports at 0374 > I/O ports at f000 [size=16] > > 00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI]) > Subsystem: Intel Corp. 82801AA USB > Flags: bus master, medium devsel, latency 0, IRQ 9 > I/O ports at d000 [size=32] > > 00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02) > Subsystem: Intel Corp. 82801AA SMBus > Flags: medium devsel, IRQ 5 > I/O ports at 5000 [size=16] > > 00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev > 02) > Subsystem: Unknown device 4352:5934 > Flags: bus master, medium devsel, latency 0, IRQ 5 > I/O ports at d400 [size=256] > I/O ports at d800 [size=64] > > 01:05.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01) > Subsystem: Conexant Dynalink 56PMi > Flags: bus master, medium devsel, latency 32, IRQ 5 > Memory at e5000000 (32-bit, non-prefetchable) [size=64K] > I/O ports at c000 [size=8] > Capabilities: [40] Power Management version 2 > > 01:0a.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M > Ethernet PCI Adapter > Subsystem: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet > PCI Adapter > Flags: bus master, medium devsel, latency 32, IRQ 11 > I/O ports at c400 [size=256] > Memory at e5010000 (32-bit, non-prefetchable) [size=1K] > Expansion ROM at <unassigned> [disabled] [size=64K] > --------------------------------------------------------------------------------------------------------------------------------------- > > > I have googled but could not find the solution. > I have also downloaded the source code and compiled but still gettiing the > same message. > I am not able to get the eth interface Up. > Even when I tried to load the pci scan moudle I get the similar message as > '.....unresolved symbol... '. > > PLease help me in getting the card detected. > Thank you > > Regards, > Naresh > > _________________________________________________________________ > Movies, music, celeb news. Stay in the loop. http://www.msn.co.in/cinema/ > With MSN Entertainment! > > _______________________________________________ > realtek mailing list > [email protected] > http://www.scyld.com/mailman/listinfo/realtek >