Linksys Etherfast 10/100
"Jacob S." <[email protected]>
| Newsgroups | gmane.linux.drivers.tulip.general |
|---|---|
| Message-ID | <[email protected]> |
I'm using a Linksys Etherfast 10/100 rev. 5 in my Debian firewall box. It's setup as eth1, with eth0 being a 3com 3c509. eth0 goes to my dsl modem, and eth1 goes to my internal lan. I'm using ipmasquerading and ipchains from kernel 2.2.19. There are no irq or io conflicts, and judging by the amount of data being passed, things would seem to be working great. However, "less /proc/net/dev" shows that I have 0 transmitted packets, and 806769 transmit errors. Quoted below is the full output from /proc/net/dev, and ifconfig. I've tried different cables, different hubs, changing which NIC goes to the dsl modem and the other to the lan, etc. and nothing seems to help. Is there something obvious I'm overlooking, or is the card bad? TIA, Jacob ----- In a world without fences, who needs Gates? http://www.linux.org/ ________/proc/net/dev__________________ Inter-| Receive packets errs drop fifo frame compressed multicast face bytes eth0: 708962160 803774 0 0 0 0 0 0 eth1: 95672167 649726 0 0 0 0 0 0 Transmit packets errs drop fifo colls carrier compressed bytes 92415431 628204 0 0 0 305 0 0 0 0 806769 0 0 0 1609010 0 ___End of /proc/net/dev________________ ______ifconfig_________________________ eth0 Link encap:Ethernet HWaddr 00:10:4B:C4:A7:DA inet addr:216.87.134.162 Bcast:216.87.134.167 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:803777 errors:0 dropped:0 overruns:0 frame:0 TX packets:628207 errors:0 dropped:0 overruns:0 carrier:0 collisions:305 txqueuelen:100 Interrupt:9 Base address:0x240 eth1 Link encap:Ethernet HWaddr 00:04:5A:6C:BA:AE inet addr:192.168.35.1 Bcast:192.168.35.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:649741 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:806797 dropped:0 overruns:0 carrier:1609063 collisions:0 txqueuelen:100 Interrupt:11 Base address:0x6100 ____End of ifconfig____________________ _______________________________________________ tulip mailing list, [email protected] To change to digest mode or unsubscribe visit http://www.scyld.com/mailman/listinfo/tulip