Re: Linksys Etherfast 10/100
Donald Becker <[email protected]>
| Newsgroups | gmane.linux.drivers.tulip.general |
|---|---|
| Message-ID | <[email protected]> |
On Fri, 26 Jul 2002, Jacob S. wrote: > I'm using a Linksys Etherfast 10/100 rev. 5 in my Debian firewall box. > It's setup as eth1, with eth0 being a 3com 3c509. eth0 goes to my dsl > modem, and eth1 goes to my internal lan. I'm using > ipmasquerading and ipchains from kernel 2.2.19. > > There are no irq or io conflicts, and judging by the amount of data > being passed, things would seem to be working great. However, > "less /proc/net/dev" shows that I have 0 transmitted packets, and 806769 > transmit errors. Quoted below is the full output from /proc/net/dev, and > ifconfig. What driver version? What is the detection message? -- Donald Becker [email protected] Scyld Computing Corporation http://www.scyld.com 410 Severn Ave. Suite 210 Second Generation Beowulf Clusters Annapolis MD 21403 410-990-9993 _______________________________________________ tulip mailing list, [email protected] To change to digest mode or unsubscribe visit http://www.scyld.com/mailman/listinfo/tulip