Re: Linksys Etherfast 10/100
"Jacob S." <[email protected]>
| Newsgroups | gmane.linux.drivers.tulip.general |
|---|---|
| Message-ID | <[email protected]> |
On Fri, 26 Jul 2002 10:01:21 -0400 (EDT) Donald Becker <[email protected]> wrote: > On Fri, 26 Jul 2002, Jacob S. wrote: > > > I'm using a Linksys Etherfast 10/100 rev. 5 in my Debian firewall > > box. It's setup as eth1, with eth0 being a 3com 3c509. eth0 goes to > > my dsl modem, and eth1 goes to my internal lan. I'm using > > ipmasquerading and ipchains from kernel 2.2.19. > > > > There are no irq or io conflicts, and judging by the amount of data > > being passed, things would seem to be working great. However, > > "less /proc/net/dev" shows that I have 0 transmitted packets, and > > 806769 transmit errors. Quoted below is the full output from > > /proc/net/dev, and ifconfig. > > What driver version? > What is the detection message? ------Excerpt from /var/log/messages------ Jul 26 09:55:56 stonewall kernel: tulip.c:v0.91g-ppc 7/16/99 [email protected] Jul 26 09:55:56 stonewall kernel: eth1: ADMtek Centaur-P rev 17 at 0x6100, 00:04:5A:6C:BA:AE, IRQ 11. ----End of excerpt from /var/log/messages---- ----- In a world without fences, who needs Gates? http://www.linux.org/ _______________________________________________ tulip mailing list, [email protected] To change to digest mode or unsubscribe visit http://www.scyld.com/mailman/listinfo/tulip