Re: tulip with 3CSOHO100B-TX on Redhat 9

Donald Becker wrote:

>On Thu, 17 Apr 2003, CP wrote:
>
>  
>
>>I could not load pci-scan with "modprobe tulip", it gave :
>>
>>r/oot@localhost root]# modprobe tulip
>>/lib/modules/2.4.20-9/kernel/drivers/net/tulip/tulip.o: init_module: No 
>>such device
>>Hint: insmod errors can be caused by incorrect module parameters, 
>>including invalid
>>IO or IRQ parameters.
>>      You may find more information in syslog or the output from dmesg
>>/lib/modules/2.4.20-9/kernel/drivers/net/tulip/tulip.o: insmod 
>>/lib/modules/2.4.20-9/kernel/drivers/net/tulip/tulip.o failed/
>>    
>>
>
>Errkk.
>The problem may be that the "other" tulip driver prevents a correct
>module dependency table from being generated.
>
>Here is an example of a correct module dependency
>grep tulip /lib/modules/2.4.17-0.18.18_Scyld/modules.dep
>
>/lib/modules/2.4.17-0.18.18_Scyld/net/tulip.o:	/lib/modules/2.4.17-0.18.18_Scyld/net/pci-scan.o
>
>
>  
>
interesting.....  here is my "grep tulip 
/lib/modules/2.4.20-9/net/modules.dep" output:

/lib/modules/2.4.20-9/kernel/drivers/net/pcmcia/xircom_tulip_cb.o:
/lib/modules/2.4.20-9/kernel/drivers/net/tulip/tulip.o:
/lib/modules/2.4.20-9/kernel/drivers/net/tulip_old/tulip_old.o:
/lib/modules/2.4.20-9/net/tulip.o:      /lib/modules/2.4.20-9/net/pci-scan.o

CP

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip