Re: Linksys PCMPC200 CardBus - problems with tulip.c compilation

On Tue, 21 Oct 2003, Michal Kepien wrote:

> OK, I've got the modules (pci-scan.o, cb_shim.o, tulip.o) compiled,
> but when the system is started, the following messages appear:
> 
> :Oct 18 13:23:35 lordpopcorn cardmgr[787]: watching 2 sockets
> :Oct 18 13:23:35 lordpopcorn cardmgr[788]: starting, version is 3.2.5
> :Oct 18 13:23:48 lordpopcorn kernel: cs: cb_alloc(bus 20): vendor 0x1737, device 0xab09
> :Oct 18 13:23:48 lordpopcorn cardmgr[788]: socket 0: Linksys EtherFast PCM200 v2

Good, a recognized ID.

> :Oct 18 13:23:48 lordpopcorn kernel: tulip.c:v0.97 7/22/2003  Written by Donald Becker <[email protected]>
> :Oct 18 13:23:48 lordpopcorn kernel:   http://www.scyld.com/network/tulip.html
> :Oct 18 13:23:49 lordpopcorn cardmgr[788]: get dev info on socket 0 failed: Resource temporarily unavailable

There should be messages after this point.

What does 'lspci -v' report about attached devices?

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
914 Bay Ridge Road, Suite 220		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip