Re: Linksys PCMPC200 CardBus - problems with tulip.c compilation

OK, I've got the modules (pci-scan.o, cb_shim.o, tulip.o) compiled,
but when the system is started, the following messages appear:

:Oct 18 13:23:35 lordpopcorn cardmgr[787]: watching 2 sockets
:Oct 18 13:23:35 lordpopcorn cardmgr[788]: starting, version is 3.2.5
:Oct 18 13:23:48 lordpopcorn kernel: cs: cb_alloc(bus 20): vendor 0x1737, device 0xab09
:Oct 18 13:23:48 lordpopcorn cardmgr[788]: socket 0: Linksys EtherFast PCM200 v2
:Oct 18 13:23:48 lordpopcorn cardmgr[788]: executing: 'modprobe cb_enabler'
:Oct 18 13:23:48 lordpopcorn cardmgr[788]: executing: 'modprobe pci-scan'
:Oct 18 13:23:48 lordpopcorn kernel: pci-scan.c:v1.11 8/31/2002  Donald Becker <[email protected]> http://www.scyld.com/linux/drivers.html
:Oct 18 13:23:48 lordpopcorn cardmgr[788]: executing: 'modprobe cb_shim'
:Oct 18 13:23:48 lordpopcorn kernel: cb_shim.c:v1.03 7/12/2002  Donald Becker <[email protected]>
:Oct 18 13:23:48 lordpopcorn kernel:  http://www.scyld.com/linux/drivers.html
:Oct 18 13:23:48 lordpopcorn cardmgr[788]: executing: 'modprobe tulip'
:Oct 18 13:23:48 lordpopcorn kernel: tulip.c:v0.97 7/22/2003  Written by Donald Becker <[email protected]>
:Oct 18 13:23:48 lordpopcorn kernel:   http://www.scyld.com/network/tulip.html
:Oct 18 13:23:49 lordpopcorn cardmgr[788]: get dev info on socket 0 failed: Resource temporarily unavailable

From what I know, the last message should be preceded by some sort of
other error message - however, here it isn't. Therefore I don't know
what may be the cause of the problem. Any more hints?

Michal Kepien
_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip