Re: tulip and alpha error kernel 2.4.22

On 27 Nov 2003, Martin Arrieta wrote:

> i have one alpha lx164 with debian (woody) and kernel 2.4.22.
> 
> #uname -a
> Linux alpha 2.4.22 #7 Thu Nov 27 07:13:47 UYT 2003 alpha unknown
..
> 00:05.0 Ethernet controller: Digital Equipment Corporation DECchip 21140
> [FasterNet] (rev 22)
> 	Subsystem: Netgear FA310TX Fast Ethernet
...
> when i start the interface with linux tulip driver i get 
> 
> Nov 27 07:40:55 alpha kernel: eth0: (1) System Error occured (1)
> Nov 27 07:40:55 alpha last message repeated 16 times
> Nov 27 07:40:55 alpha kernel: eth0: (2) System Error occured (1)
> Nov 27 07:40:55 alpha last message repeated 15 times
...
> with scyld tulip driver i get the same error.

That message isn't in the Scyld driver.

A similar message is
		printk(KERN_ERR "%s: PCI Fatal Bus Error, %8.8x.\n",
					   dev->name, csr5);
The exact numbers in the output are critical for understanding the
problem.

What is the driver detection message?

-- 
Donald Becker				[email protected]
Scyld Computing Corporation		http://www.scyld.com
914 Bay Ridge Road, Suite 220		Scyld Beowulf cluster system
Annapolis MD 21403			410-990-9993

_______________________________________________
tulip mailing list, [email protected]
To change to digest mode or unsubscribe visit
http://www.scyld.com/mailman/listinfo/tulip