Re: max mtu 1468 bytes with Any Card and Linux 2.4.29 & linux 2.6.10 + gcc 2.3.2
Ben Greear <[email protected]>
| Newsgroups | gmane.linux.drivers.vlan |
|---|---|
| Organization | Candela Technologies |
| Message-ID | <[email protected]> |
Jan Holmberg wrote: > Hi all, > > Can't send any packet higher then 1468 ( 1500 - 32 ), device are correct > and will send 1500 + 4 bytes, but the 8021q seems to not work and the > code looks good. It's a vannila kernel and i386 in 2.4 & 2.6 tree in > both case. And the problem seems to be in receiver code on VLAN tagged > port, not sending. > > If untagging on other side and set mtu 1468, then I can ping any size > and from my vlan interface. > > Any Ides ? > > Chip tested Tulip & 8139too > > And Linux 2.4.29 & 2.6.10 > GCC 2.3.2 I thought 8139too had VLAN support, but Tulip will definately have to be patched. If you can get an Intel pro/100 or pro/1000 and use the e100 or e1000 driver, then VLANs will work with no problem. Thanks, Ben -- Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com